My rewriter does not have a drive - LG Dvd Rewriter Gsa-e60n 20x Ext Black Usb2.0 - ELECTRONICS - GSA-E60N DVD-RAM Burner

If the tray is out of alignment you may as well replace the entire DVD R/W device. Even if you manage to reset the alignment, the read/write head may be misaligned and recording messed up. A new drive is only $30

Check the data connector on the rear of the drive. If this doesn't work you may need a new drive, they are cheap and readily available.

Drive ID "H" is sometimes used as a spare partition for rescue disc purposes within Windows.

try using Nero dvd burner...

First, open the external casing.
You'll find an "internal" CD/DVD drive, connected to an adapter, and the adapter connects to the USB cable.

Now, look at the adapter -- it could be a "parallel-ATA" interface, or it could be a "SATA" interface. The new CD/DVD drive will have to have the same connectors (data and power) as the adapter.

You might have to exchange the SATA device for a Parallel-ATA device.

If you have a parallel-ATA CD/DVD drive, look at the back of it.
There is a tiny jumper, and a few labelled settings:

* MA(ster)
* SL(ave)
* C(able)S(elect)

Move the jumper to the 'MA' setting, so that the USB-adapter will recognize the CD/DVD drive.

Connect the drive to the adapter.
Close the case.
You're good to go!

Hi

go to folowing link there is vedio's for DVD playe

http://www.youtube.com/watch?v=GMu-gCxqRMs

No dear. External Hard disks, pendrives etc does it for you. A CD/DVDRW plays only CDs & DVDs + burns CDs & DVDs. Please send me your feedback & vote to motivate us & to help us help you.

Wow two burners hooked up I wonder why there is confusion here. I would recommend you taking out one of those burners to save issues like this something is geting fouled up and verry confused here. Your runnig two burners and who knows why but anyhow to get rid of this issue take out a bruner.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

It could be that the media that you are using is not compatible with the writer. Is the rewriter a DVD +-R drive or just a CD-RW drive? What software are you using to write to the media.

may want to try updating the software....worked for me when i had a similar problem.