At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Have you a video on how to replace belts on a sharp...
It appears there are no tutorials available for the GF-7500.
You may find it helpful to watch the tutorial on how to replace the belts on the Sharp GF-9595 though - https://www.youtube.com/watch?v=9rapQpDJJFg
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have the original measure the Diameter in mm and also the width in MM. You don't have to be spot with these measurements. Then put the words "turntable belt XXmm (diameter) into Google. You should find something, you can narrow it down by adding the width, but I would just try the diameter first. If you need to remove the belt make a note of how it fits first!
You basically have to keep dismantling the tool untill you can get the belt out, then re-assemble the tools again. Sorry to be so basic but thats about the only way to solve this problem. Sometimes you can cut the belt up and remove it, but most times you have to disassemble the tool some.
×