Switched off and restarted but still keeps on showing the error. help!!
Firmware Bug
Special firmware version (Web browser LK-101v3 support; Filename: GQQ-65 A1610Y0-F000-GQQ-65.exe)
Special firmware version GPQ-65 (Filename: A1610Y0-F000-GPQ-65.exe)
Notes:
1. HDD Format will be necessary when CE301 or CED01 is displayed.
2. Please refer to attached Program Release Information prior to installing the firmware.
SOURCE: i am receving error messages E301 or E100
E100 - 001 and 002:
BD error has occurred.
• The laser unit has a fault.
• The BD PCB has a fault.
• The BD PCB has a fault.
• The laser driver PCB has a fault.
E301:
The scanning lamp intensity has a fault.
• The scanning lamp has a fault.
• The CCD PCB has a fault.
• The DC controller PCB has a fault.
Seems to that you have issues with dc controller pcb
SOURCE: paper jam, with error signal.
Hi,
It tends to be the problem of roller. Roller is not moving smoothly, just manually move the roller to and froth and then close the lid properly. Now try to take a print it will work fine.
Hope this helps.
Shane
SOURCE: Cannon GP 405 error code E100, E301, E220
sir my machine gp 405 showing the above error 0100, 301, 220
what the reason and solutions. please give me
11,118 views
Usually answered in minutes!
×