How to thread Necchi MP200 sewing machine. I just bought this and want to start using it.

SOURCE: Necchi Lydia 3 sewing machine

yahximasiz
\

SOURCE: necchi 3101

if you have e-mail I can scan and send you the diagram.

SOURCE: Designer 1: upper thread shredding while embroidering

I too, have the same problem withmy Designer 1. I just bought ISACORD brand polyester embroidery thread to hopefully solve this problem, but I believe it must be a tension problem. I have a "date" with the repair lady on Friday (11/22/08) and if it gets repaired I will re-post what the problem was. Still love the machine WHEN IT SEWS!!

SOURCE: 6022 necchi sewing machine

There is a site that has instructions with how to thread the machine properly. Click here for the www.sewusa.com threading section

SOURCE: how to thread necchi 537L sewing machine

From the reel pin take the thread to the left and over the top thread guide above the takeup lever, make sure the takeup lever is up and and make sure the presser foot is up, take the thread straight down and round the right hand side of the tension unit and back up the left hand side to the takeup lever, thread the takeup lever right to left and take the thread down any guides to the needle, if the bobbin case goes in the front thread the needle front to back, if the bobbin case goes in the side thread the needle left to right.