Question about Panasonic Lands Phones

1 Answer

How to setup outgoing(to mobile phone and external landlines) calls on extension line on panasonic kx-t7730 hybrid phone

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Panasonic Master
  • 54,195 Answers

Try Googling (Panasonic)(kx-t7730)(manual) without parens for instructions.

Posted on Apr 29, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: I cant make calls on my Kx-t7730 but i can recieve calls

sounds like you need to call a qualified tech

Posted on May 11, 2008

Anonymous

  • 1 Answer

SOURCE: panasonic KX-T7730 CORDED PHONE

my telephone is lock forget pasword

Posted on Nov 05, 2008

Anonymous

  • 4 Answers

SOURCE: We have KX-T7730, want to stop incoming calls going to a different extension, so that the main calls just go through reception phone

try 408

Posted on Feb 26, 2009

cnavarro

Carl Navarro

  • 2460 Answers

SOURCE: lock extension with my Panasonic KX T7730

Do you need the default lock code because you already did this, or is it locked and you can't unlock it?

This is probably close, but in the American version it's 77 lock lock # to set and 77 lock # to release, where lock is a 4 digit number.

The System manager can release all locks from their phone. You'll have to make arrangements with an "engineer" to get those codes.

Carl (working on Br terms)

Posted on Jul 18, 2009

Phonesmith

Phonesmith

  • 113 Answers

SOURCE: panasonic kx-t7730

Hello, if you are using this phone with a 308 or 824 system, while the handset is still on the cradle / hook press PROGRAM and then the one touch button you want to assign a CO line to. Now press 0 followed by the line port number ( example 1 ). Press AUTO DIAL / STORE to save the changes. Press PROGRAM to exit program mode.
PLEASE vote if this was helpful

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set welcome greeting to panasonic KX-T7730


The 7730 is a smartphone (PT) that connects to a Panasonic Hybrid exchange such as the KTES824 as an EXTENSION not a CO.

When you say greeting do you mean a recorded greeting when calling the extension?

In the 824 switch you will need to activate the Automatic Attendant (AA) that is built-in

Oct 28, 2013 | Panasonic KX-T7730 Corded Phone

2 Answers

Panasonic KX-T7730, we have a 824 phone system and cordless handsets (kx-tg1711) we cannot make outgoing calls on these handests but can take incoming calls and can transfer calls. how do we programme


  • Locate the program and auto-store button on your telephone. You will be using these to customize many of the features on your KX-T7730. The program button is used to enter or exit programming.

  • 2

    Program your outgoing line preference, i.e., the line you prefer to seize when you go off hook. Press "Program" "1" "1" "store" for no line. Press "Program" "1" "2" "Store" for an idle outside line. Press "Program" "1" "3" "Outside Line Number" "Store" for an assigned outside line. The outside line number will be a single or double-digit number that is set through your phone system.

  • 3

    Program your incoming line preference, i.e., the line you prefer to answer when you go off hook. Press "Program" "2" "1 "Store" for no line. Press "Program "2" "2" "Store" for ringing line. Press "Program" "3" "Outside Line Number" "Store" for an assigned outside line.

  • 4

    Program your flexible CO buttons. These are the inner row of 12 lighted buttons. Your outside lines need to be programmed to these--you can choose any of these 12 buttons in any order. Press "Program" "CO Button" "0" "Outside Line Number" "Store." The outside line number will be a single or double-digit number that is set through your phone system.

  • 5

    Program any other unused flexible CO buttons for an extension number or any frequently dialed phone number. Press "Program" "CO button" "1" "Extension Number" "Store" or "Program" "CO Button" "2" "9 + Phone Number" "Store". A "9" must be entered at the beginning of a phone number to tell your phone system to seize an outside line before dialing, e.g., "9-1-212-555-1234."

  • 6

    Locate the programmable feature buttons (the row of 12 solid buttons on the right). These buttons are basically one-touch buttons that can be set for extension numbers or phone numbers. Press "Program" "(PF) Button" "Extension Number" "Store" or "Program" "(PF) Button" "9 + Phone Number" "Store." Remember to press "Program" again to exit programming.

  • 7

    Locate your "FWD/DND" button. This button is used for setting "Call Forward" or "Do Not Disturb" on your telephone. To set call forwarding, go "off-hook" either by lifting the receiver or pressing speakerphone. Make sure you go to intercom and not an outside line. To forward all calls, go off-hook, press "FWD/DND" "1" "extension number" (the extension number that you wish to forward all your calls to) "#". After you hear a confirmation tone, place the receiver on-hook. The steps to set call forwarding for busy/no answer are the same as above, except you will press "2" in place of "1". To cancel call forwarding, press "0" in place of "1".

  • 8

    Program "Do Not Disturb," which stops your phone from ringing--any callers will just hear a DND tone. To program, go off-hook, press "Program" "4" "#" on-hook, to set. Press "0" instead of "4" to cancel.

  • 9

    Locate the message button--this works in coordination with your message light at the top right of your telephone. If the light is lit, press "message" to hear a message left to you either by another extension or a voice mail system. The message button can only be programmed as a message or one-touch button. To program as a message, press "Program" "Message" "3" "Store." To program as a one-touch, press "Program" "Message" "1" "Extension Number" or "Program" "Message: "2" "9 + phone number."

  • 10

    Return your KX-T7730 to its default settings by pressing "Program" "#" "*" "Store."



  • Read more: How to Program a Panasonic KX T7730 ' eHow.com http://www.ehow.com/how_7159736_program-panasonic-kx-t7730.html#ixzz1eYPzbevZ

    Nov 23, 2011 | Panasonic KX-T7730 Corded Phone

    1 Answer

    I'm using Panasonic KX-T7730. and Panasonic Advanced Hybrid System KX-TES824BX . Please help me.I need to make security lock for outgoing calls ...


    In programming you can set up Forced account codes for Local, Toll, or All calls. The extension is flagged in program 605 or 2.1 of the system and the codes are put in 310 or 1.5. It's one of 2 ways you can do it, you can also change Class of Service on each phone to deny them access to certain numbers.

    Keep in mind that this is programming for a TA-824 release 3.0. We know loop start CO lines and no ISDN or BRI. Your system may be different.

    Carl

    Nov 23, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    KX-T7730 - Used to have 3 incoming/outgoing lines. Have cut this down to 2(lines 1 and 3). Outgoing calls are automatically selected by line 3, 2, 1. When calling out the second person can't get an outside...


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system.
    From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle/hook :
    1. Press PROGRAM * # followed by the system password ( default is 1234).
    2. Now press 400 and then SP-PHONE. Enter the line number you wish to change. ( In your case 2)
    3. Press AUTO ANS / MUTE to change between Connect and Not Connect.
    4. Press AUTO DIAL / STORE to save your changes.
    5. Press PROGRAM to exit program mode and you are done.

    Mar 17, 2010 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Panasonic KX-T7730 CORDED PHONE


    my telephone is lock forget pasword

    Oct 14, 2008 | Panasonic KX-T7730 Corded Phone

    1 Answer

    Panasonic Adv Hybride System KX-T7730


    If you are using the KX-T7730 phone on a Panasonic KX-Txx 308 or 824 system. From the Switchboard / Main telephone ( usually ext 101, 10 or 9 ) with the handset on the cradle press PROGRAM * # followed by the system password ( default is 1234). Now press 604 and then SP-PHONE. Enter the jack number you wish to change ( 01 is extension 101, 02 is extension 102 etc. ). Enter the name ( basically the same as texting on a cellphone ). Press AUTO DIAL / STORE to save your change. To go to the next extension press SP-PHONE. Don’t forget to press AUTO DIAL / STORE to save your change after each name entered. Press PROGRAM to exit program mode and you are done.
    PLEASE rate / vote this answer if it was helpful.
    Thank you.

    Sep 18, 2008 | Panasonic KX-T7730 Corded Phone

    2 Answers

    Calling out


    Here is the link to the user manual if you need it; http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF Page 7 - locking your extension should help you out Please ask again if you need more help :)

    Feb 23, 2007 | Panasonic KX-T7730 Corded Phone

    Not finding what you are looking for?
    Lands Phones Logo

    Related Topics:

    223 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Lands Phones Experts

    Ekse

    Level 3 Expert

    13434 Answers

    martin hogg

    Level 2 Expert

    157 Answers

    guyvstewart

    Level 2 Expert

    115 Answers

    Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...