Lands Phones Logo

Related Topics:

I
Irianni Gunawan Posted on Apr 16, 2018

We are using Panasonic KX-T7730. Please urgently advise how to activate my intercom ring tone. Boss dialed my extension through intercom but my phone not ringing. Pls help. Thank you

5 Related Answers

Anonymous

  • 201 Answers
  • Posted on Jul 17, 2007

SOURCE: Program manual

Your phone will work on a few different Panasonic phone systems. If you are looking for manuals on KX-T7720 and KX-T7720 all you will find is a user guide for the phone. You need to determine the model number of your phone system before starting to look for a programming manual.

Ad

Anonymous

  • 1 Answer
  • Posted on Apr 21, 2008

SOURCE: KX-T7730, all the phones connect with operator ring at the same time when having an incoming phone

please i need your help,i use KX-T7730 in my office and of recent when incoming calls comes in all the phones in the office starts ringing and also i would like to know how i can lock and unlock the phone so as to prevent other users from accessing it.Thanks

A

Anonymous

  • Posted on Jun 17, 2008

SOURCE: How to change ring tone of kx-t7730

sir please i want to when call my consol i'm not there i picup phon our telephone set plz suggest

cnavarro

Carl Navarro

  • 2460 Answers
  • Posted on Aug 25, 2008

SOURCE: change the ring tone of Panasonic KX-T7730

I think it can be done. Just exchange the phone for a 7633 and change out the TA for a TDA-50.

Piece of cake.

Carl

Anonymous

  • 1 Answer
  • Posted on Dec 21, 2009

SOURCE: kx-t77730

in the left side of phone is a ringer setting key, put it in big bell symbol

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to page a stored line on Panasonic KX-T7730?

When you put a call on hold you should get intercom tone. At that point you just dial the 3 digit extension you want to speak to. That ext should ring or have a voice page. Make sure the auto answer button is lit on the phones to do voice page
0helpful
1answer

How do we make internal calls with Panasonic KX-T7433 handsets?

By default, Panasonic numbering is 101-164 and 201-264. The Intercom gives you dial tone and you dial the 3 digit extension number. Dial 0 should ring extension 101. Normal digital phones start at 101-116 on a TD816/1232 cabinet.

Carl
5helpful
1answer

I have a Panasonic Keyphone Model: KX-T7750, having problem with alert of intercom/incoming calls. No ring tone but with flash light and intercom light on. May I know how to fix this. Thank you!

Calls are signalled in two ways. First, check the Ringer switch on the left side of the phone. It's a 3 position switch OFF/LO/HI. If the outside lines are blinking the MESSAGE light, then the ringer is probably turned off. If your intercom calls are toning but not ringing, you may have the AUTO ANS light lit. Press it until it's off and intercom calls will either start ringing or send an audible tone.
If it tones, then you have a programming problem where intercom calls are set to tone instead of ring. That's corrected in system programming.

Carl
0helpful
1answer

How do I use the intercom function on a KX-T7731 phone??

Panasonic analog phones plug into analog KSU's and have extension numbers beginning with 101. In additon, you can dial 0 to reach the phone programmed as Operator, and it's usually extension 101.

With the intercom dial tone (press INTERCOM or pick up the handset or press SP PHONE) you can start dialing codes defined in your number plan. You can also program left side buttons to monitor are directly select other extensions or dial codes to page all idle speakers in a 77xx phone.

Note this is specific to TA series systems, but the operation is similar in all Panasonic models.

Carl

2helpful
1answer

I have a panasonic kx-t7730 phone. A techie set up call forwarding from the phone to another extension, and now I can't remove it. Can you help?

From the intercom, dial 7100 or 710#. Call forward codes are set via 71x and the extension plus #.
This is the TA series code set. The bigger systems have 710x codes.



Carl
3helpful
2answers

How can i active or desactive the FWD/DND in the model. KXT7730?

it really depends on your phone system

but the possibilities are:

1) "INTERCOM"
2) *710
3a) 0 to deavtivate
3b) 5 to set to busy/no answer
4) put the number you want to fwd to then "#" *confirmation tone*

or

1) "INTERCOM"
2) 710
3a) 0 to deavtivate
3b) 5 to set to busy/no answer
4) put the extension number you want to fwd to *confirmation tone* (extension number only)
0helpful
1answer
2helpful
1answer

I have a Panasonic KX-T7030 Hybird system and mistakely hit the FWD/DND button that is now flashing and my phone dosent ring. How do I take this off?

I think you can press FWD and dial 0 to reset. If that doesn't work, try dialing 700+ your extension on the intercom. That should always work, no matter what system the phone is connected to.

Of course, if neither one works, please post back the model number of your SYSTEM cabinet (the white box in a closet, electrical room, back office, etc.).

Carl
1helpful
1answer

KX-T7730 Corded Phone: WHEN THERE IS AN INTERNAL INTERCOM ACTIVATED TO AN...

Make sure the Auto Answer button is not lit on the empty desk phone, then you could use either 40 to answer all calls, or 4+ the extension number to absolutely answer that phone.

Not finding what you are looking for?

389 views

Ask a Question

Usually answered in minutes!

Top Panasonic Lands Phones Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Panasonic Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...