Can I use a USB to charge my surface pro3 - Computers & Internet

https://www.barcodesinc.com/psion-teklogix/part-ps1050-g1.htm
https://www.barcodesinc.com/psion-teklogix/part-wa4003-g2.htm

have you got the charging cradle ?
it is part number WA4003-G2
search on internet for it with the part number
and the power supply
part number ps1050-g1

What make model TV and wireless adapter are you using?

If you are using PS2 Keyboard try USB type.

Hello

yes, your correct this could be the lower board with the issue.
The lower board could have blown a fuse, which you can check and replace quite easily. If the fuse is good look for other burnt spots on the board. The lower board may need repairing/replacing.
If the machine stopped while in use (after about 10min) then you will have a few other problems to check. Try adding silicone spray under the belt and if this has already been done then the running belt may need replacing.

E1 is never a good thing...

gymWorld.net.au

The switch mode power supply maybe faulty. Try another power supply.

I think you need to go into the BIOS of your computer and enable the slot BEFORE the operating system boots.

Pixel view pro3 SAA7130 TV Tuner/FM Radio/Video PCI Capture card after installings it says cannot render video capture pin to null filter plz help me

Probably a weak connection. Clean the clamping surface and the battery connection surface and try again.

Try unmuting the linein this is a general issue for this type of tuner cards