Trying to program codes for symphonic tv need tv codes

These are the codes for Symphonic TV: 0053 0189 0227 0456 0024

These are the steps on how to program your RCA Universal Remote Control to your Symphonic TV.

1. Press and "HOLD" CODE SEARCH.
2. Press and release the TV button. When the TV button flashes proceed to the next step.
3. Enter the three digit code. In your case, the code for the Symphonic TV are 064 or 076.
   
4. Release CODE SEARCH.
5. With the TV on, press another button, for example CHANNEL UP. If the TV responds, no further programming is required. If the TV does not respond, repeat steps 1-5 using the other code number.

Try this method:
Turn on the device you want to program.
Press and hold CODE SEARCH until the indicator light lights then release code search.
Press and release the device button you are programing TV, the indicator light will blink once then remain lit.
Press and release OFF/ON until your device turn off.
you may have to press upto 200 times
When your device turn off press enter button the indicator light will go off,good luck.

the code is026.

the codes are in the back of the remot manual or try oneforall.com

the code is 033

I have a Symphonic also and I was able to program it to watch TV using the dfirections on teh inside of the battery door. Try it! I can't get VCR to work though.

155 worked for me.

Try to buy another manual (univesal remote control) because its not easy for you to get the codes if it will not work the write to us again.

1150 worked for me :o)