At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: DON'T KNOW HOW TO FIT NEW WATCH STRAP WITH PINS IN....
Get pen knife and insert the blade between the watch strap and watch lug from the bottom side. Pry the springbar inwards using lever action. This must release the springbar.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I don't know for the swatch specifically but all watches are roughly the same beast. If you look at the side you will notice small pins on the band. With a very small jewelers screw driver and some light tapping you can pop the pins out. The end connections near the watch and then on the clasp side are usually spring loaded which can be removed with a tiny flat blade as well. Just tap out the pins and keep track of them, you will need to tap them back in once you have removed the extra link to make this smaller.
mcdevito75 here, You can but a new strap for your Fissil watch almost any where, Ebay, or you can look for a small watch repair shop in your area as they would have the watch right there for a perfect fit. With anything else you"ll need to know the MM size of your strap. As the strap attaches to the watch case at the pins, simply measure in MM"s this is the size of the band you need, if you can only measure in Standard Measurement use the search online for conversion Inches to MM. But with a watch shop they do everything for you.
they are very tough they have more pressure on them than most spring pins also on your watch they are tucked into the leather very well. the best way is with a spring tool apply quite a bit of pressure. a normal watch band will not fit this watch. it will only take skagen replacement bands.
http://www.skagen.com/service/home.fx
use a pocket knife and put the blade in the grove in between the strap and the steel of the case and pull towards the leather of the strap the pins are sping loaded and work simular to a miniature shower rods very simple so dont get nerves bout it if all else fails you can even just destroy them geting them out and get new pins and straps at wallmart for like 5 bucks
×