Fix cold water valve code 49 fisher and paykel wt**t26***

SOURCE: I have a fisher and

Hi there. FC 49 has a few possiblities
1. the wiring connection to the cold water valve has been disconnected
2.the cold valve has failed, compare resistance with hot valve (they should be the same)
3 the motor controller has failed

I hope this helps

SOURCE: Error Code 49 on Fisher & Paykel Intuitive Eco

Fault 49 usually points to the cold inlet valve, either open circuit or not connected correctly. I often come across machines that the motor controller is the problem too.

SOURCE: Code 49 and Manual Book

Fault 49 usually points to the cold inlet valve. I have come across many with this fault that the valve tests ok and it needs the motor controller replaced.

SOURCE: code 49

it probably Needs a new cold water solenoid valve.

sonic boom electronics

• 1557 Answers
• Posted on Jul 12, 2010

SOURCE: Error Code 49 Fisher and Paykel Washing Machine

the code error (49) is telling you that the inlet valve is not working make sure the hoses are not blocked. if you have fitted the valve and is still not working then i would try using the unit on cold if it still does not work then there must be a short in the p.c.b control board.

hope this helps a little more