My GBC docuseal 95 won't heat up - Gbc Office Equipment & Supplies

Question edited for clarity and toss in some caps.

It is sold under different maker names.

GBC Docuseal 2700 Roll Laminator Operators Manual ( ...

adss.net
https://www.adss.net > DOC2700_OP_MAN
PDF This Service Manual covers Specifications, Operation, Troubleshooting and includes an. Illustrated Parts List for the Docuseal 2700 (Docuseal 3100 for Australia) ...

ibico Laminator User Manuals Download

ManualsLib
https://www.manualslib.com > Brands > ibico Manuals
Download 20 ibico Laminator PDF manuals. User manuals, ibico Laminator Operating guides and Service manuals.

Ibico 2700 27? Hot Roll Laminator

Boggs Equipment
https://www.boggsequipment.com > product > ibico-27...

Ibico 2700 27? Hot Roll Laminator. S/N OIG3993. SKU: 033020080120 Categories: Bindery & Finishing, Equipment, Laminators. Description .

..

you may try using tweezzer or use compressed air to dislodge it

You can find answer by typing gbc heat seal H300 into your browser. answer took less than 5 seconds.
https://www.adss.net/documents/manuals/HS100_200_300_OP_MAN.pdf

I find if I hit the reverse button it works again.

We have an Ulitma 65 and it won't heat up...Any suggestions on how to fix this? We are at a school and no $ to replace the whole unit. Thanks in advance.

either the top or lower heater shoe TCO is blown out. take the right side cover off, trace the wires back to the heat shoe and check for continuity, (unplug machine first) find out which TCO is blown order another one, replace it and your off to the races. I've fixed many of them.

each heat shoe has a small thermal fuse, if either fuse is blown, the laminator keypanel will not operate. 99% fix everytime, just follow the wires from each heat shoe (right side of laminator) cover off. Ohm each set of wires and look for an open circuit. replace fuse (TCO) and it will work everytime.

so what model are you having troubles with

Go to http://www.mybinding.com/.sc/ms/ch/parts.html, and scroll down the list of products to "pouch laminators" then choose your specific model. When you click you can access parts information as well as a diagram of the equipment. Good luck.