My stanley bc6809 switches on but goes off after 10 seconds, why is this?

Question edited to fix spelling.

It is a Utility Knife, it has no software downloads. You posted to Computers and Internet? I'll move it to Cutting Tools.

https://www.google.com/search?q=stanley+10-778

6-5/8 in FATMAX® Retractable Utility Knife ' STANLEY

https://www.stanleytools.com > product > 10-778 > 6-5...
Designed with the user in mind, the 6-5/8 in. FATMAX® Retractable Utility Knife offers durability and strength in one compact package.


..
.

There are lots of models. Some have a trigger lock and some have a 5 position trigger.

https://www.google.com/search?q=stanley+spotlight+manual

..

If the battery to be charged has fallen below 2 volts, the battery cannot be recharged

Stanley usually have a lifetime warranty so get the phone number for service from a Home Depot Store and call in for a replacement tool.

Hello: TRY THIS Attempt to start the car leave the key on for 10 minutes or until the security light goes out, at this time turn key off for 10 seconds, turn switch on for ten more minutes or when security light goes out, turn key off for 10 seconds. Turn key ON for ten minutes or when security light goes out, turn key off wait 10 seconds, then start car....

yes the yellow dial switch should be turned to on

sounds like a switch issue but from the number of issues posted here---that this unit is having--I would check on line with consumer guide to see if there's class action for this product being defective---also attorney general--this also goes for the rest of people who own these Stanley power stations this is the best I can do--sorry

This knife is ****. To load... you have to push the slide all the way forward. Make sure the switch is set to unlock. PINCH THE BLADE WITH YOUR FINGERS AND WIGGLE IT INTO PLACE. Then you have to use every ounce of thumb power to relock the switch.

Once you are done, the blade will still come out in 9.9 / 10 times you cut something.

Google: how to change blade in Stanley 10-379 utility knife. Stanley website shows how knife & blade look on the outside. Put it together so it looks like that. Sorry, but ain't don't know how to send the picture to you.

check the pin configuration on the back of the Stanley 3200