Did Ricky Nelson record Bimbo Bimbo???? Please...

Hi Ricky Rae, indicates the harman kardon model you are commenting on, in order to find the best possible solution
It may be that you have no output due to a malfunction of the power stage
I wait your answer
Greetings Franco Dosil

Hola Ricky Rae, indica modelo del Harman Kardon que estas comentando, para poder encontrar la mejor soluci?n posible
Puede ser que que no tengas salida por un mal funcionamiento de la etapa de potencia
Espero tu respuesta
Saludos Franco Dosil

My wife is a Ricky Nelson fanatic and she says absolutely no way he recorded Bimbo Bimbo. She has all of his records, albums, tapes, CDs and song lists.

Hi Ricky, Im AL the owner of Big As Auto Repair.

Ricky, if the high beams work when you hold the lever in, then its the high beam switch NOT the light switch. The lever controls the high and low beams. You need the multi-function switch which is also the dimmer switch. Hope this helps and please visit my auto-repair-website at: http://www.bigasautorepair.com/

It is a bit hard to use Nelson 8426 controller but as we are professional gilbert irrigation firm we will help you out but I would like to instruct manual. so, please let me know. Thank you Sprinkler Repair Gilbert AZ Water Sprinkler Installation

Hi Ricky...saw your post re the 753 Mission tweeters. Your post goes back some months ago but I wondered if you got fixed up with replacement ones or a workaround ??
Regards
Wayne
[email protected]

I get error code 63 when i turn on my Fostex vf160

Have you tried their website? These sprinklers are relatively expensive units as I remember. Well made and well worth fixing. Usually nylon gears with stainless steel shafts. Parts should be available through Nelson. Google: Nelson Traveling Sprinklers and see what sites pop up. If this has been helpful, please rate it accordingly. Good luck.

did it myself and saved $15 Yee hah!!!!

I have the same problem is there a solution? In addition I have no power on the handheld and have tried 3 batteries. Any ideas?

To set the time do the following:

Press PROG*
to display Program.

To set record DATE,
press to select:
1~31= one time, or
DAILY= MON~ FRI, or
WEEKLY= same time
each week and
press SET.

To set remaining items,
press
to select and
press SET
to set START/ STOP times,
CH (channel) or LINE
input (p. 35), and tape
speed (SP, LP, SLP).

Press PROG
to end programming.

To Enter More Programs,
press
to select and
press SET
to set an unused program
number, and then repeat
step 2.
Or
Press PROG
to exit.

The “Timer” Indicator lights up on DECK.
• You can do Timer Recording with the power on or off.
• “TIMER REC WILL START SOON” appears on-screen for 2 minutes
before Timer Recording starts. If DECK is in DVD mode, no message
appears, but the VCR REC Indicator, the VCR mode indicator and
“REC” will flash on Multi function Display.

Hope this helps!
Brad Nelson