At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Look at the valve wiring to see what color each valve has 1 of the 2 wires connected to it. This is your common connect the same one to common at timer. Start zone 1 and touch each of the remaining wires to the pin to start a zone. Then you can connect them in any order you want in the pins.
these types of cameras normally have 3 connections. one if for the power, prob DC12V. another is the video out, which needs a BNC connecter, the third is for the lens if you put one on the bullet camera. power has a (-)(+) and sometimes G (ground)
Inside the camera is a 4 pin connector connected to the LED Board, with the connector in hand, turn it till you see the pins inside the connector, from left to right wires 1st-white, 2nd-black, 3rd- bare wire or shield, 4th-red, yellow is not connected, the RJ45 end, face the latch away from you, wires are 1st-red, 2nd-white, 3rd-yellow, 4th-shield(bare wire), 5th-black, the LED Board has the wire positioning marked,,,,,
Lorex Corp SG6184S Weatherproof Mini Color Security Camera with Night Vision,where can i download manual,wanting to set it up to my vcr and clueless how this is done,i have camera's yellow white cables in tv[video/audio but unsure how to connect or what to do so i can record from vcr,please specifies
My Canon Elura50 did the same. It's a manufacturing defect with the CCD, (The image sensor) mount installed by Sony Corp.
Canon Service centers hounour a full repair of this problem free of charge. You just have to find one close and take it in for "CCD problem"
Incidentally Canon has about twenty or thirty cameras with this same problem. Everything works but there is no image. It's the Sony CCD mount inside Canon Cameras.
Trust me, It's 100% free repair.
×