Finding the plug in for charging my go go scooter

Keep your scooter on charge doesn't sound right. Usually, eScooters take 3-4 hours for charging and many chargers have a red while charging. These chargers turn the green light on when they completed the charging. Here, you can also read more tips about the take care of your e-scooter or e-bike https://www.insurance4ebikes.co.uk/looking-after-your-e-bike/. However, according to auto experts battery should be full all the time.

• Turn the scooter's power switch to the OFF position.
• Connect the charger's plug to the charging port on the scooter.
• Plug the charger's power cable into a power outlet.
• When the charger's LED red/orange light is on, the battery is charging. Optimal charging time is 6 to 8 hours, or up to 10 hours to achieve a complete charge. The scooter manual will have the exact charging
• Times recommended for your scooter.
• Stop charging when the LED light is completely green.
• Disconnect charger from the scooter, then from the power outlet.
• Run your scooter before riding it to verify the battery charge.

Charge without the key on. Make sure your charger is applying power to the scooter. It may have a blown fuse or some other internal problem. If your batteries were totally discharged your charger will not recharge them. You'll have to charge them individually with an automotive style battery charger that is NOT an automatic charger. It may take 3 days continuous charging to recover enough charge before your scooter charger will continue to charge until the batteries are fully charged. If this doesn't work then the batteries will never take a charge nad need to be replaced.

measure the voltage of the batteries thru the charging socket of the scooter, the outside 2 pins.

You can charge the batteries with your offboard charger and the battery pack still on the scooter just plug the charger into the charger port on the side of the battery case and then plug it into the wall socket and charge overnite Will work just like if you removed the battery pack from the scooter. Hopw this helps you

With a Pride Scooter the charger will turn green if its fully charged and if there is a bad connection in the wiring with the batteries. If you plug in the charger and the light comes on green right away then there is a problem with the wiring or connections. Take a voltmeter and read the voltage at each battery. Fully charged they should be 13-15 volts each. If they are less than 12 volts then they are not charged and the charger is not working correctly. If the batteries are really low like less than 8 volts each then the scooter might not come on at all. If you find that the batteries have at least 12 volts or more then there is a wiring problem from the rear of the scooter to the front tiller. Pride has a habit of developing problems in the harness running from the rear to the tiller. My suggestion is to contact your provider (where you got the scooter) and have them troubleshoot the scooter. If the scooter is less than a year old then it should be under warranty and your provider will have to fix it under warranty. Sorry I don't have a quick fix for you but scooters are notoriously bad to troubleshoot and repair, especially long distance. Hope this helps you

Look in your manual if you lost it then, go to razor.com and request one. But the simple answer is to:
1. Turn off the scooter
2. Plug charger into wall outlet.
3. Find the hole on the side that matches the charger plug(not the wall outlet plug) .
4. Plug the charger into the scooter.
5. Wait until the charger turn off ( if the charger is a smart charger), typical charging time is 4-6hours.

*If not a smart charger you can calculate the charge time by using an online battery charging time calculator.

hi , sounds likek a charger problem but if you have tried another charger then check the charger plug connection where the charger plugs in,

Check the batteries are connected correctly.

Regards
GeWiz.

make sure the outlet your using to plug in the charger is good (plug in a lamp,light or radio to check) if good make sure the charging cord is plugged in all the way. If you using an extention cord, try without.