I have a digital wrist watch and I can not set it up.

SOURCE: Tissot wrist watch goingin reverse since new battery fitted

It sounds like the battery might be in backwards. They do
have polarity,...it DOES matter how it goes in. Try opening it, and
flip the battery to see if that helps.

Mark

SOURCE: reset watch

Hi

Thanks for using FixYa. You can set the time on your accurist watch by following this procedure--

TIME SETTING--

1. Push the bottom right hand button until the mode hand indicator points to TME.
2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position.
3. Select the time zone on the digital display by pressing the upper right button or the lower left button.
4. Pull the bottom right button out one click. The bottom part of the digital display will start flashing. Press the bottom left button to adjust for daylight saving time.
5. Press the upper right button. You will see the seconds flashing on the lower half of the digital display. Press the lower left button to reset the seconds to 00.
6. Press the upper right button. You will see the minutes flashing. Press the lower left button to set the minutes to your current time.
7. Press the upper right button. You will see the hours flashing. Press the lower left button to set the hours to your current time.
8. Press the upper right button. You will see 12H or 24H flashing. Press the lower left button to switch between 12 hour and 24 hour.
9. Push the lower right button back in.

SET THE CALENDAR--

1. Push the bottom right hand button until the mode hand indicator points to CAL.
2. Press and hold the upper left button for three seconds. The hour and minute hand will retract to the 12 O’clock position.
3. Select the time zone on the digital display by pressing the upper right button or the lower left button.
4. Pull the bottom right button out one click. You will see the month flashing on the digital display. Press the lower left button to change the month.
5. Press the upper right button and the date will begin flashing. Press the lower left button to change the date.
6. Press the upper right button. You will see the year flashing. Press the lower left button to change the year.
7. Push the lower right button back in.

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

SOURCE: I have a Timex indiglo wr 30m wrist watch and I can't set the day

http://www.timex.com/info/Product_Instruction_Guides_Downloads

Use the numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

SOURCE: How can i set digital time and alarm in the Timex

Try this ,it may work for you as i m having mf13-t1

Press MODE then then SET
Press ALARM to increase the count and to change time t1 or t2.
Press MODE to switch the digit place
finally press SET and then MODE

Note: Check for bell and sound symbols,if they are not there
Press MODE then then SET again press SET
Press ALARM for once or twice depending on symbols.

SOURCE: setting time and date

need the right time on my computer, need a time change