Packaging removal from Stanley fat max box cutter #10-778?

https://www.ebay.com/itm/Ac-Adapter-for-12V-Ac-Adapter-for-Stanley-FatMax-LED-Fat-Max-Bright-10W-Lithium/352062730401?hash=item51f892f0a1:g:Ap0AAOSwurZZHjsu

Don't touch the blade by hand use a pair of pliers. There should be a screw in the center of the handle, just remove it and you will see how to remove the blade.https://youtu.be/pFnbiw88Z8c

I have attached a link to some stanley instructions as well as a Schumacker /pdf. Good luck!

http://www.stanley12volt.com/#!jump-starters/c31q

I agree. The packaging is ridiculous.
I removed it by grasping the packaging and pulling (very hard) from the blade end (bottom left as looking at it) straight out. This stretched and tore the plastic "paper" and pull the knife free.

I know it's 3 years old this question but I had the same problem. Good thing is the makita battery willl fit. I just got one from ebay works great

1500mAh 7.2V BATTERY FOR MAKITA 7000 7002 7033 192695-4 632002-4 Cordless Drill

Push the blade out as far as it will go and hold in the button on the side while slideing blade in and out.

some stanley knifes require stanley blades only, or make sure the clip blade is in is seated in the grove completely.

Press and hold the "+ - units" button and hold for over one second. It should then let you select your units of measure. In this case it should be the second selection, which is "0.00 ft". If you lost your owners manual, you can download one at www.engineersupply.com/Manual-and-Help-Docs/Stanley-TLM100-Manuals.pdf. If you find this helpful, please rank the solution.