How to set the channels for a klh r-3100 - KLH Audio Players & Recorders

The speakers connections have to come from an amplifier with sound coming from it in the first place. Once connected to the unit the bass signal is then extracted from the signal and the rest of the signal sent to the main speakers. The KLH will not power the main speakers on it's own. The unit will only take the two main stereo channels, from an amplifier, the left and right then go to one set of inputs and they then come out of the other two outputs.

Yes, the 10-120 can use a L & R low level subwoofer input. You can get a short 6" RCA splitter adapter from Radio Shack for a under $10. (1 female input, 2 male outputs) Alternately, just plug the subwoofer output on your receiver to just the low level R channel on the KLH sub.

Call Apple and talk to setup technician.

HI,
Check the following link you will get the answer why There is no manual avilable for KLHr5100. Still i dont have the manual for this one.
http://www.epinions.com/review/pr-KLH_R5100_5_1_Dolby_Digital_DTS_Channel_Home_Audio_Receiver/content_554691628676

Ajin

you can get free user manuals at, http://www.retrevo.com/samples/index.html

There should be numbered buttons on the receiver.Set the channel to what you want to preset,then press and hold down the numbered button you want.The sound will probably go away for a couple of seconds but when it comes back on the channel is preset.If you press the band button while you're already on FM and it goes to another FM,you can also preset more channels for FM.There should only be one AM band,then it will switch back to FM.
Good luck! Greg

i searhced for a manual but i couldnt. i havve link maybe it works for you

check it
http://www.receivertech.com/klh-r7000-61-channels-receiver.html

one channel will not record

Return the unit to where you purchased it and get a new one.