Symphonic TV codes

Try these codes.
0053 0189 0227 0456 0024

go to comcast web site they will give you a code to enter into your remote.Juust enter the info..Hope it helps

Here is the code for your symphonic tv that works for me. It is "0053."


Here are the steps:
1.

Press the "On" button on the symphonic TV to turn that set on.

2.

Hold down the TV button on the symphonic remote until all of the buttons on that remote flash.

3.

Type in 0053 code for the symphonic TV remote as you point the remote toward the TV.

4.

Press either the "Power" or "Pound" ("#") button on the symphonic remote to save the code

The real problem with the Comcast remote is that there is no other brand, it's not like a Sony remote that's relabeled or anything. Fortunately, Google helps again, and it turns out Comcast has a page online about programming the Comcast remote control.
Comcast 3-in-1 remote control To program the remote to work with your Sony TV, you need to take the following steps:

1. Find the code or codes for your TV from Comcast's list [PDF]
2. Turn your TV on
3. On the remote, press and release the TV key on the very top of the remote.
4. Press and hold the Setup key, until the "TV" key flashes twice, then release the "Setup" key.
5. Using the number pad, enter in the first 4-digit code found next to your television brand on the chart. If you do this correctly the "TV" key will flash twice. Now it's programmed!
6. Now point the remote at your TV and press the Power key. If the TV turns off, you're golden. If not, try again with the next code on the list.

You should try codes for Funai, Symphonic, & Sylvania. Some Tecknikas are same as some of those. At least in my Comcast cable box remote code listings.

10180, 10171 those are the symphonic remote codes for comcast.

I have trouble changing channels in my tv please somebody help me

0180, 0171, 0000 if your remote has a GREY ok/select button on it,
20675, 20821, 20000, 20593, 21593 if your remote has a RED ok/select button on it

The remotes you get from the cable company are universal and kinda cheap. ive ran across this multiple times but since i dont know what model remote you have the only advice i can give is that the code you used is not the right code if it doesnt do all basic functions (on,off for the tv,volume)its just the wrong code if the codes you stated are the only ones available the book you got with the remote should explain how to run an auto scan.hope i was some help

1150 worked for me :o)