Canon iR C3200 E00020 02d0

get manual here
http://www.scribd.com/doc/61327440/Canon-Irc3200-Service-Manual

my canon keeps giving me error code E000744-1001
does any one know how to fix it :0)

thanks

http://www.nodevice.com//manual/ir-c3200/get153849.html
This service manual should help you

Fault connected withdrum/developer,in this case yellow(E.020-0170)
...-0270 is magenta,...0370 cyan and ....0470 black.

This is a reader communications error. It's been a long time since I worked an IR-C3200 copier but all cables must be plugged in. They will only go where they were intended to go. Reseat all those cables and good luck, other wise you have a professional help problem. Make sure all the cable checks are done with power off. Then power up agai n and see what happens.

E020 is a Drum/developer error code

-01b0 is a yellow drum error

-0260 is a magenta drum error

drums need replaced

7622A001AA Yellow drum part#

7623A001AA Magenta drum part#

7624A001AA Cyan drum part#

7623A001AA Black drum part#

Is the copier making a load noise? You may have a broken driver gear in the fixing unit.

plz tell me reason of e602 code in canon ir c3200

Use the Irc 3200 drivers on the Canon USA

Color imageRUNNER C3200 : Drivers & Downloads
http://www.usa.canon.com/opd/controller?act=OPDSoftwareAct&fcategoryid=2269&modelid=8927

The developer concentration
target value is faulty (set when a
new drum is fitted; the value is
extremely small).
The fault is with the yellow drum unit, normally replacing it solves the fault.