Hi,we have an old kenwood chefette hand mixer with worn parts.

go online with the model and search for replacement parts

Hi, the new style tools do not fit old style mixers, yours probably had the small circlip on the shaft, the new ones dont have this, and it's this what held your tool in place

Can't refer you to a dealer there but it is likely that only the motor's brushes need to be replaced. This isn't a difficult DIY job and the brushes shouldn't cost more than ~ $20 US.
You could also remove the housing covering the motor and see if the commutator is visible. This is a segmented copper cylinder and shouldn't be completely blackened although some signs of black is normal. The brushes ride on this cylinder and if the brushes have become too short, it can cause arcing and smoke. Clean that surface before installing new brushes and they too may smoke and cause rough running until they are worn in. The brushes can be had many places so you will have to choose one convenient to you:
Kenwood Chef Brushes

for both attachments to fall out the planet hub must be worn out. check that there is a spring clip in the groove of the beaters. if you have had it repaired recently it may be running backwards which woluld eject the attachments.

I live in the US and have an old Kenwood KM230 Mixer that I absolutely love. Unfortunately I can not locate a replacement for the spashguard that has now cracked. The old splashguard item # 27215/31227 is the replacement spashguard....any solutions

What resistors and capicitors are used on the motor control board on the Kenwood A901.
Thank you
Jon

CAN REPAIR OR REPLACE MOTOR. IT NEEDS A CAPACITOR KIT FITTING OLD ONE WORN OUT.

£25 PART EXCHANGE PLUS POST. 07507400101

Hi,

Contact a locale store that selling kenwwod and ask for a splashguard, the spare part number is KW604349 it´s a 'D' shape

Hi,

There are not any spare part more than Beaters, Kneaders and Beater gears to this machine.