Cyberlink Power Director 14. Burning Unsuccessful. Error eFF030C00

you can only play blu rays in a blu ray player,you need a dvd player to play dvds

Before following the suggestions given below please make sure that you have the latest firmware for your DVD burner drive. Please contact your vendor or visit the manufacturer's website for the latest updates.

Please follow the steps mentioned below to resolve the issue:

1) Empty the contents of the C:\Windows\temp folder and C:\temp folder, if you have one. Then empty Recycle Bin.

2) Defragment your hard drive. DVD video files are very large and can quickly fill your hard drive to capacity. A fragmented hard drive can cause problems during DVD burning. Make sure to defragment your drive(s) regularly.

3) To avoid any compatibility issues, please close all other software and utility applications including virus scans, screen saver and instant messaging software before you launch PowerDirector.

4) Increase Virtual memory :

1. Right click on "MyComputer"
2. Select Properties -> Advance
3. Click on "settings" under Performance.
4. Select "Advance"
5. Click on "change" under Virtual memory.
6. Select "Custom" and enter initial value as "512" and Max value as "3096".

NOTE: If your existing settings are higher than recommended then leave them as before.

5) Please check whether the drive where you have installed Power Director software has enough space on it. At least 15 GB of free space is required and recommended while burning a DVD.

Now, try to burn the DVD at low burning speed.

If the issue still persists, try to uninstall other CD/DVD burning software like Nero, EasyCD Creator, Direct CD etc. Two burning software installed on same computer are known to cause conflict due to common files in them.

Also disable the XP built-in burning software. To disable the Windows built-in burning software:
- Open My Computer.
- Right-click your CD-RW or DVD drive and click Properties.
- Select the Recording tab.
- Remove the check mark from the 'Enable CD recording on this drive' check box.
- Click OK.

Also make sure that the total size of the video does not exceed the disc limit. (It is recommended that the total size should be less than 4.3 GB)

Now, close all other software and utility applications and then try the 'Create a DVD folder' option in the burning options screen and let us know of the result.

If the DVD folder is burned successfully, then the issue is burner specific and not software specific.

If the issue still not resolved, you may need to reinstall the Power Director software. Uninstall other burning softwares and then reinstall Power Director.

Follow the steps given below to reinstall your PowerDirector. Before installing your program, please close your MSN messenger, since we found that MSN messenger my lock some installation programs.

i) Uninstall PowerDirector software:

a.)Start--> Programs -->Cyberlink PowerDirector --> Uninstall PowerDirector

b.)Start --> Run --> type "regedit" --> click "HKEY_LOCAL_MACHINE" --> click
"Software" --> click "Cyberlink" --> "PowerDirector". Delete folder "PowerDirector".

c.)Start --> Run --> type "regedit" --> click "HKEY_CURRENT_USER" --> click
"Software" --> click "Cyberlink" --> "PowerDirector". Delete folder "PowerDirector".

d)Reboot your PC.

ii) Reinstall PowerDirector. (NOTE: Before installation please close MSN Messenger, if open)

Now try again to 'Create a DVD folder'.

Go ahead with burning DVD only if the DVD folder is created successfully and without errors.

Hi ,
It could be you didn't receive a capture software with your purchase . You need a specific software for this like Cyberlink Power Director : http://www.cyberlink.com/products/powerdirector-ultimate-suite/features_en_EU.html?&r=1
Regards .

i think your software got damaged or your PC may has virus

Hi ,
You need to convert the original files to Mpeg files . If they are MOD files , you can do this by using a specific tool designed for it : SDCopy , you can download from here :
http://www.mediafire.com/?wzmigzhjj0z
If your orinal files are others than MOD , you need to identify them first but conversion to MPEG is the secret .
Good luck !

Hi, maybe you can try to download a software like Cyberlink Power Director 8. After installing that software, you can connect your Camcorder to your computer then Open the Power director you have installed and go to the "Capture" tab and see for your self.

Hope this helps you..Merry Christmas ( :

LOOK IN TOOLS AND SETTINGS OR HELP AND FIND THE UPDATE BUTTON AND UPDATE THE SOFTWARE. PLUS YOU ARE RIGHT THAT IT MAY BE PROBLEM USING EXTERNAL DRIVE.(IS IT USB 1.0?)..COPY YOUR FILE TO A TEMPORARY FOLDER ON YOUR DESKTOP AND BROWSE TO THAT FOLDER WITH POWER DIRECTOR.

Hi there!

Try unplugging the DVC90 and uninstalling it from Device Manager. Then go to the Control Panel and delete all the drivers you find. Reboot and try the installation again. If I remember correctly you can run PCLUSB2.exe first to get the drivers on your hard drive and then plug the device in. When you do that just point the driver install to the folder that the drivers got installed to.


Have fun!

*Your vote is highly appreciated. Thanks in advance!

Power Producer Gold 2 is not a shareware/freeware program; it's a commercial, off-the-shelf product from CyberLink. It is video-editing software and is used for home moviemakers looking for a user-friendly program. PowerProducer 2 is compatible with many movie formats and can double as a digital photo album. It's generally available at around $69.95. It won't add incredible graphics or Hollywood special effects to your movies but it's a reliable and simple system for capturing video, cleaning it up with editing tools, and burning the end product onto CD or DVD.

I don't know if Power Producer 2 Gold is available becaue Power Producer 5 is on the market. You can get more information on buying it at www.gocyberlink.com

Let me know if this helps.

[email protected]





I believe it's available for about $69 from sold by CyberLink

The PC Kit provides movie capture, DVD authoring, DVD-R burning, photo editing, and DVD playback capability on PC based computers equipped with Windows 98, ME, 2000 and XP. The kit includes a USB Cable, USB1.1 Driver, UDF2.0 Writer, CyberLink Power DVD XP, Ulead® DVD Movie Factory SE for DVDCAM and Ulead Photo Explorer7 Lite.