M Box 2 Mini Can not be Found

According to Sabrent's support site there are no drivers for Windows. The OS has native drivers. Windows 8 is not shown as a supported OS.

If this is a windows 7 installation then you could try the following:

http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool


If it is XP you could try the following but it is quite complicate from my experience:

http://liliputing.com/2008/04/install-windows-xp-on-mini-note-usb.html

How to load Mini DVD to Mac

• Though Mini DVD can not be played back in Mac slot loading player, we have other ways to load Mini DVD to Mac.
• Method 1 If Mini DVD camcorder has FireWire or USB; just connect the Mini DVD camcorder to Mac using FireWire, or USB to load Mini DVD to Mac.
• Method 2 If Mini DVD camcorder has not FireWire or USB; just shop for external mini-DVD drive that uses either a USB or Firewire connector cable, and then connect the external mini-DVD drive to your Mac and install any extra software that came with it. Insert the mini-DVD into the external drive, and then access the files on the mini-DVD as you normally would to load Mini DVD to Mac.
• Method 3 If Mini DVD camcorder has not FireWire or USB; buy an adapter that converts a mini-DVD to a normal DVD by adding on a circular plastic piece that emulates the full size of a regular DVD. Attach the adapter to the mini-DVD and load it into the Mac's DVD drive to access the files. (Check the specifications of the adapter before purchasing, as several on the market do not work in vertical-loading drives like those found on the MacBook Pro.)
• Method 4 If Mini DVD camcorder has not FireWire or USB and you don't want to buy a separate external drive or full-size adapter either, but you do have access to a PC, you can transfer the files on the mini-DVD onto the PC, then put them onto a USB flash drive, which will work on your Mac.

more detailed at http://www.bigasoft.com/articles/easy-solution-to-import-midi-dvd-into-imovie.html

Hi, kindly get it here :
www.sony.com/
www.brothersoft.com/.../sony-handycam-software.html
www.userdrivers.com > Camcorder

Yes, you can boot from an USB device - connect an USB optical unit , and you will be able to install whatever OS you want on it. Or you could boot from an USB stick loaded with a special version of any Linux distro you want.

Hi,

The solution provided below will definately be of great help to you


1.Locate the mini-USB port on your phone. This is usually found on the left or right side of the phone, so look there before checking the top or bottom

2.Use a standard size mini-USB to connect the phone to the computer. Plug the end of the small cord into the phone's mini-USB port and then plug the big end into a standard-size USB port on your computer.

3.Install drivers which are locatrd on the pc suite of your phone Once your phone is connected physically, a software link must also be made. Your computer will not automatically recognize your phone, and a window will pop up asking if you want to install some drivers. Click the "yes" or "OK" button to continue.


4.A status window will pop up once your OS has found suitable drivers. Once the status window fills up, your computer will be ready to interact with your phone. The phone should now be charging. Check the phone screen to make sure.

5.Install any relevant software. Branded smartphones from Palm, BlackBerry and Motorolla all have specific software that comes bundled with the phones. Once the software is installed, you can launch it and interact further with your phone



Good luck!!

There are two methods.
1. Purchase or borrow an USB external CD/DVD drive connect it to the mini laptop's USB port and install the software from this drive.
2. Use a different computer and copy the contents of the CD to an USB memory stick and then plug it into the mini laptop's USB port and install the software from this USB memory stick.

Hi
A. Download the TINspire OS from education.ti.com

Use the Ti-Nspire computer link to reload the OS onto the calculator.

1. Remove the Ti84 keyboard and insert the Ti-Nspire keyboard.
2. Make sure the battery are good.
   
3. Connect the TI-Nspire device (with the Nspire keypad) to the computer using the USB Standard A to Mini B cable
4. Run the Ti-Nspire computer link software.
5. The select device dialog should appear, and detect the device.
6. With the mouse cursor, select the OS, drag it and drop it on the main window (file browser window) of the TI-Nspire computer link software.
7. Alternatively, click the menu Tools and select Install OS. A Select file window opens.Use the browse button to point to the OS and click Open/OK

B Installing from another Ti-Nspire ( not a TI-Nspire CAS) if availabe)

1. Connect the two devices using the USB Mini A to Mini B cable
2. The end marked A should be inserted into the sending unit, while the end marked B should be inserted into the receiving unit.
3. Both units must be turned ON
   
4. On the sending unit, access the document chooser by pressing [Home](the house icon).
5. Once in the document chooser, press [Menu] and choose 9:Send OS…

Hope it helps.
Thank you for rating the solution.

I had purchased the laptop with Window Vista Home Premium OS. I am unable to connect my Mini DV Sony DCR HC 40 E through firewire. the laptop doesn't recognise mini DV. Please suggest proper driver & solution

how i get my o2 xda ii mini drivers?