What does the ee error mean and how do i fix it on a blood pressure monitor specifically on the shopko 72-506 model but if you dont know about that specific model just tell me a basic for all answer

The most common error symbol that appears on the display panel is a EE with a down arrow and two numerals. The reason for the EE Error Indicator is generally caused because the cuff has been wrapped too loose. The cuff was under-inflated during the measurement.

Sorry we have no way to help with this.

Check your user manual, there should be a section on error codes. Most often E or EE errors are leaking cuff or improper use.

http://manuals.harborfreight.com/manuals/67000-67999/67212.pdf

According to your User Guide, 'EE' stands for Cuff has been placed incorrectly. Wrap the cuff properly so that it is positioned correctly. Also, did you move during measurement? Measure again and hold arm and wrist still.

If you continue to have a problem wit the unit, contact HoMedics (the manufacturer) Customer Service Dept @ 800-466-3342. 8:30am - 5pm ET, Monday - Friday.

The EE symbol can mean one of three things: Excessive low blood pressure, improperly placed cuff or movement of the arm during the measurement.

Hope this helps solve the problem. If it continues, contact HoMedics Customer Service @ 800-466-3342

Hi. One of the most common error symbol that appears on this display panel is a EE with a down arrow and two numerals. The reason for the EE Error Indicator is usually caused because the cuff has been wrapped too loose. The cuff was under-inflated during the measurement. This error will also display if the cuff is worn and needs to be replaced. The EE symbol with a down arrow indicates the cuff is over-inflated. In most instances the cuff has been wrapped too tight or you are using the incorrect cuff size. Turn the monitor off. Read the instructions to correctly apply the cuff. Wait five to ten minutes then take another measurement. This should correct the issue.

'EE' means cuff is underinflating. Re wrap cuff with varying amounts of pressure and restart [wait 2 minutes between readings].

That either means you are moving, or you are inflating the cuff to soon after turning it on. Either of these is what mine means when I use it.