Error code 0x67 CPU DXE initializaton. What is mean and how is fix?

https://printcopy.info/?mod=erc&brand=Epson&model=WorkForce+WF7610&code=0x67

sounds like memory

Its solution is quiet simple you can remove error by following these steps:
press the home button and select Setup > Maintenance > Ink Cartridge Replacement.
Then install them

http://printcopy.info/index.php?l=en&mod=erc&brand=Epson&model=WorkForce%20WF7620&code=0x88

Diagnose and replace parts if necessary, quoting from link above:

Epson WorkForce WF7620 Error Codes All codes 0x01 0x02 0x03 0x04 0x05 0X06 0x09 0x0A 0x0B 0x0D 0x0E 0x10 0x11 0x12 0x13 0x14 0x20 0x30 0x36 0x41 0x42 0x43 0x44 0x45 0x46 0x49 0x4A 0x4B 0x4D 0x4E 0x51 ... 0x55 0x60 0x63 0x67 0x68 0x69 0x6B 0x7F 0x81 0x82 0x83 0x84 0x85 0x86 0x87 0x88 0x89 0x8D 0x8E 0x8F 0x93 0x97 0x9A 0x9B 0x9C 0x9D 0x9E 0x9F 0xB0 ... 0xCF 0xD1 0xD2 0xD3 0xD4 0xD6 0xD8 0xD9 0xDA 0xDE 0xDF 0xE1 0xE2 0xE3 0xE4 0xE5 0xE8 0xE9 0xEA 0xEB 0xEC 0xEE 0xEF 0xF1 0xF2 0xF3 0xF4 0xF6 0xF8 0xF9 0xFA 0xFE 0xFF

Code

0x88

Description

Printer. PIS Excessive Light error

Causes

• PIS failure • Main Board failure • Diffused light

I have found several different solutions that may help you ,try Google and type in the search engine

DXE legacy Option ROM Initialize error,(1011 0010)
There are several post that will walk you through some procedures,too much to get into on this site.

Well it usally means the fan is bad it may work and keep your CPU cool but it can still send the code just replace the fan

Hi.first pull-out your motherboard in the CPU case then power on without memory only processor installed.if you hear continuous beeping your motherboard is working good.
try this beep code means.

No beep means short,no power,bad CPU,loose peripherals.
One beep means everything is normal running motherboard.
Two beep means CMOS error IC.
One long beep,one short beep means motherboard problem.
One long beep,two short beeps means video card problem.
Three long beeps means keyboard error.
Repeated long beeps means memory error.
Continuous hi-lo beeps means CPU overheating.

Hope can help you.

Hello sir

Youi Probleme Is :

0102 CPU Error/ CPU Overheating

It just means that the bios is older than the cpu so it can't identify it (read its ID code). It shouldn't be a problem and a bios update will fix it (eventually).

But then, your computer will running good even the error appears. just set ur bios and the disable the press F1 for the error..

good day,

a beep from your cpu system means that there is an error. and since there is a "cpu overheat" error, it could mean that your cpu cooling system (or its fan) is not working.

the shutdown is a defense mechanism of your cpu in order for your cpu not to self distract.

have the cooling system replaced as soon as possible to avoid further damage.

i hope this will help