My jabra talk red light wont turn off - Jabra Radio Communications

The unit needs a full charge. Be certain the BT firmware and software with drivers are current. If necessary, contact the manufacturer support technician for additional assistance.

Okay, I had the same problem of Jabra Journey not talking anymore, 'voice on connected "etc. And instead it only made sounds like bing bing... Here's the answer and its so simple! Turn the unit off with the slider off/on switch, (symbols are - or o). Then, press and hold the button at the very end of the unit, (symbol looks something like sound waves), while sliding the power back on. That's all there is to it and you'll hear it start talking again.

The headset light turns off when it is at full charge. If it is not charged yet it will be illuminated red.
Found this in the online manual:
http://img5.jabra.com/sites/Jabra/GNimages/Products/Stone_Manual_EN_NA_8404.pdf

I opened mine into the on position and the charge light went from blinking to solid red.

I have the same problem with my Jabra pendant. However even though the red light goes out, it still seems to be charging. Leave it connected for about 3-4 hrs and see if the battery is full.

Assuming you're talking about the Jabra BT2050 headset press and hold the center (round) button for at least 10 seconds; light will stay solid entering the pairing mode. Follow instructions on your phone.

seeing the red light tells you that the jabra isn't fried or shorted and that there is life but there is a problem, the red light isn't blue when it should be. so have you read the directions your ear piece came with when you first bought it?... hold the on button until you see the blue light stays on.(blue light will flash fast then slow then come to a complete stop and stay on) once blue light stays on that should mean you can now find the ear piece on your cell phone to link up. if problem still isn't fixed then you might as well buy a new one.

That's how you do it for other jabra's but not this one. You have turn it on then after it's on you have to hold the function (same as power button) and the volume up button at the same time until the light turns solid.

How do I have to set up my Jabra head set?