Is there a generic conversion kit that we can buy for a Simmons kid 4 in 1 crib to convert to a full size bed? If not, how do I find the conversion rails/kit specific to the model that we have?

I can't offer the exact answer, but hopefully my suggestions will be helpful...

Converting the crib to a full-size bed should actually be a fairly simple process of detaching the 4 sides that make the crib, and replacing the 2 short sides with the full-size bed rails that were sold separately in a conversion kit. The 2 long sides of the crib become the headboard and footboard of the full-size bed.

Unfortunately, it's only a simple process if you already have the full-size conversion kit bed rails. And since Morigeau-Lepine went out of business, they aren't making any more conversion kits. If you don't have the full-size bed rails, then this could be quite difficult.

It's possible that some stores that used to sell Morigeau-Lepine cribs might still have a conversion kit hidden somewhere in the back of their stock room or warehouse. You could try calling around to a few of your local stores to ask if they would check for you. It's a long shot, but it doesn't hurt to ask.

If you have the rails, or are lucky enough to find them, then it should be as simple as locating the screws that hold the crib sides together, removing them (most likely with an appropriatly sized hex-key,) and putting the screws back through the headboard and footboard into the bed rails. (I'm really just assuming that it works the same as the Babi Italia conversion.) If no screws are visible, or if removing them doesn't detach the crib sides, then they are probably also held together with locking bed rail fasteners. To release the fasteners, remove any visible screws, then push upwards on the short side rail while pushing down on the long side rail. You might have to tap the rail up with a rubber mallot to get it moving.

If you don't have the full-size bed rails, and you can't find them anywhere, your only option may be to build them yourself, or find a woodworker to build them for you. Search online for "Bed Rail Fasteners" and you'll see several options for hardware, but they might require modifying the headboard and footboard as well. Full-size matresses are 75 inches long, so you'll want the length of your rails to accomodate (ours are 77 inches long.)

I hope I've been helpful. Good luck!

I know its been a while but if you're still looking for the toddler rail or even the full size bed rails call Lajobi (the manufacturer) at 888-266-2848 or email them at [email protected]. I bought this same crib in 2006 at Baby Depot and I ordered the toddler bed rail through them in 2009 for around $60. Now I'm ready for the full size bed rails but the crib has been discontinued. The manufactuer has a compatible bed rail in the same tea stain for $149 plus shipping.

You need to get a full size conversion rail kit from any bedding store. Make sure you get the "hook-on" style.

This Model only goes from Toddler to Full Size with conversion kit.... http://www.milliondollarbaby.com/collections/emily

The Emily Mini Crib goes to Twin bed.

I ran into a similar problem but found this out from a website when I ran a search:
The Sorelle Full Size Bed Rails (Sorelle Adult Rails / Full Size Bed Rails)
are designed to work with the following Sorelle Cribs: Madison, Tamcrest, Caroline, Vicki, Cottage, Chantelle, 9000 series, Turnberry, Anne's Lace, Manhattan, or Vista. When your child is ready to make the move from a toddler bed to a full-size bed with a headboard and footboard, you'll need these rails to make the conversion. Like all Sorelle furniture, the rails are eco-friendly, too. Each product by Sorelle is manufactured with water-based paints and odorless glue. And, Sorelle also participates in a reforestation program.

• Dimensions: 59" X 31" X 51"

TabbedUI.prototype.initialize();

i have the same problem but i searched long and hard and found this wesite where you can purchase the conversion rails.
Simplicity Ellis Crib Conversion kit for Full size Bed

http://www.nybabystore.com/p-4994-simplicity-ellis-convertible-kit.aspx

To convert your crib to a Full Size bed you will need to purchase a set of full size bed rails (hook style for headboard and foot board). You can find this at any discount mattress store, or furniture outlet, it can range in price from $39.99 - $99.99. To install the rails you will see slots with bars on the headboard/footboard, this is where the hooks on the rails slide into. There are no bolts used to secure the rails to the headboard/footboard.

Jardine enterprises does not make a wood rail kit as was shown in some of the earlier ads for the Madison line of convertible cribs, and do not waste your time ordering the rail kit from Babies-R-Us as it is simply a metal rail kit (which you may be able to get cheaper at a local furniture/mattress store).

Use the lower daybed rail between the two front posts for the foot board. Another option for the full-size conversion is to purchase the metal rails (hook style) for a headboard only and not even bother with a foot board.

If you are still unsure of what you need to do for the full-size conversion please feel free to email me at [email protected].

Simmons Juvenile Furniture ':Phone: 1-800-218-2741 ':Phone: 1-920-779-4004 7:Fax: 1-920-779-4216

I'm also looking for the standard conversion rails for my son DA712BC full size bed. Have you had any luck finding the rails?

You can call Simmons Customer support at 1-800-218-2741 and order the rails - they are $79.99 which includes shipping. I just did so yesterday. I had the same problem. I purchased this crib 5 years ago and now need the bed rails to convert to a full bed. You cal also email them at [email protected]. Shipping takes about 2-3 weeks.