Cameras Logo

Related Topics:

J
JanFeaster Posted on Aug 28, 2017

My Fuji Instax wide shot camera won't let me push the picture button?

  • Anonymous Aug 28, 2017

    Don't you mean it won't record an image when you do press the shutter ?

×

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Oct 06, 2009

SOURCE: fuji s700 taking good moon shots

shutter speed 50 to 80 ISO at 64 get your apature as small as it will go lagest f number set your focus to single point and single focus if you feel comfortable useing manual focus it is better but my manual focus stopped working here is the link to one of my moon shots on flickr

http://farm3.static.flickr.com/2516/3966267384_90afc0b269.jpg

Ad

Anonymous

  • 906 Answers
  • Posted on Jul 29, 2010

SOURCE: fujifilm instax 200 camera will not spit out pictures! :(

Link

Hi,

Camera might be damaged because of the fall, suggest to consult the Authorized Dealer near you (-see above link), or send it back to the store where you purchase it as it may be still part of the warranty.

Thank you

Anonymous

  • 1 Answer
  • Posted on Nov 24, 2010

SOURCE: I have a Fuji Instax

The same thing happened to me. Make sure that the mechanism arm on the inside that pushes the picture up is connected with the metal piece on the right hand side. The two can come loose allowing the metal piece to not bring the arm with it when you take a picture. Also the roller could have fallen down a bit. From the inside, press the roller up (it will click when it is in the right spot). The roller should be even all the way across and pushed all the way to the top of the camera.
I hope this helps if you haven't been able to fix it already.
(When all else fails, try changing the batteries.)

Anonymous

  • 269 Answers
  • Posted on Mar 03, 2011

SOURCE: fuji instax mini 25 film

X-rays can fog many types of film. If you are flying you can declare that you have film, and have them manually inspect it rather than sending it through the x-ray machine.

tingsin86

Passion Gadgets

  • 28 Answers
  • Posted on Jul 16, 2012

SOURCE: fuji instax flash is not working

Hi, There is a website at www.PassionGadgets.com which repair those problem in your mini 7s

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Is the flash off by default on start up? My light is not working.

Lomo'Instant Camera - Lomography

microsites.lomography.com/lomo-instant-camera/about/

LomographyThe Lomo'Instant has an auto flash shooting mode so you can easily shoot fantastic ...The default aperture value is f/16 and the exposure compensation dial can be ... Theflash is switched off and you can switch between N for normal daytime ... Close-UpLens Attachment (Included in the Camera plus Lens Packages): With ...

Fuji Instax 210 Instant Film Camera Review - Dan Finnen

danfinnen.com/review/fuji-instax-210-instant-film-camera-review/
Oct 2, 2013 - Here is a line of instant cameras that are still manufactured new and use film ... using the camera, mostly because your hand is already covering it up. ... Other controls include a lighten/normal/darken switch and a flash on/off button. ... Heck, if the camera didn't default into macro mode that would make the ...

Fujifilm Instax Mini 90 - Instant 'Polaroid' camera - PhotoMadd

photomadd.com/fujifilm-instax-mini-90-instant-polaroid-camera/
Jan 11, 2016 • Photography
1helpful
1answer

How do I disable automatic flash?

Instax 25 Fujifilm Camera Tutorial and Reveiw check the manuals and buttons behind the camera it self.. the number of times the button pressed gives different modes.
0helpful
1answer

My instax mini 7s wont print pictures/shutter, what do I do.

My Instax 7s won’t take any pictures only make a click noise goes blank then The red lights starts blinking I have brand new batteries and new film in what else should I do ?
0helpful
1answer

Fuji instax mini 7s

Buy some new instant film. The one in the camera probably got veiled by being exposed to x-rays.
Dec 26, 2017 • Photography
0helpful
2answers

I took a self portrait with my fuji instax mini 7s but when the film came out, it was just white. I waited a few more minutes but it still didn't have the picture i took. What's wrong?

It comes out white cause you just took the picture. It takes a few moments to "develop" the picture that will be on the card. If you don't see nothing maybe the lens was covered...but it most likely be black as in something was on the card and developed.
how to load film here:
http://www.youtube.com/watch?v=Vq8JguPxq3w


see more here:
http://www.youtube.com/watch?annotation_id=annotation_90634&feature=iv&src_vid=Vq8JguPxq3w&v=-00VbGm3uzs

0helpful
2answers

When i turn on my fuji polaroid cam, there is an "E" error message. I can't take any polaroid pictures with it altho the polaroid cam is loaded with film. Please help. Thanks

First, remove the remaining films from the camera. (while your camera is switched off) Second, press on both the shutter button and the power button at the same time. (to reset) Third, reload a new set of polaroid films into the camera.
Hope it helps!
2helpful
3answers

My fuji instax mini 7s has an error message on the screen. It blinks "E" and does not allow me to take any pictures. The instructions and manuals that came with package are all in japanese and i...

Firstly, remove the remaining films in your camera (while the camera is switched off) Secondly, switch on the camera. Press the power button and the shutter button simultaneously at one go. (to reset) Thirdly, reload a new set of polaroid films. Hope it helps!
14helpful
1answer

I have a Fuji Instax 210. Now the polaroid picture won't come out from the top. I opened the back and cleaned the rolling part but it still doesn't work. What can I do to fix it? I don't know any place...

The same thing happened to me. Make sure that the mechanism arm on the inside that pushes the picture up is connected with the metal piece on the right hand side. The two can come loose allowing the metal piece to not bring the arm with it when you take a picture. Also the roller could have fallen down a bit. From the inside, press the roller up (it will click when it is in the right spot). The roller should be even all the way across and pushed all the way to the top of the camera.
I hope this helps if you haven't been able to fix it already.
(When all else fails, try changing the batteries.)
1helpful
1answer

Fujifilm instax 200 camera will not spit out pictures! :(

Link

Hi,

Camera might be damaged because of the fall, suggest to consult the Authorized Dealer near you (-see above link), or send it back to the store where you purchase it as it may be still part of the warranty.

Thank you
Not finding what you are looking for?

90 views

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...