Fuji xt 2 - showing storing in view after image taken , how do I take this off

SOURCE: Very, very dark (almost black) lcd screen, but is functional

The LCD viewer is made up of the LCD screen, and the backlight. Your backlight is burnt out, or the circuit board isn't sending power to it. Backlights can be replaced separately.

SOURCE: fuji Finex 800 camera

If it's pink/purple and "streaky", you have a bad CCD sensor. The only fix is replacement of the sensor. This is the main image capturing sensor in the camera. The situation is well documented on the web. It's usually the end of the camera, unless it's under warranty (or just a little past). Approaching Fuji's repair department can sometimes yield a sympathetic rep who'll have it fixed at no charge to you. If you are on the hook for the repair, expect to drop about $100 US.

SOURCE: EOS 40D, LCD Won't view only displays taken images and menu

here is Canon's answer;


Issue: The LCD/Electronic Viewfinder will not display an image or the image is distorted.
Solution: If all troubleshooting steps have failed, please have your EOS 40D serviced.

Details: [ Hide ] Unfortunately, the issue you describe seems to indicate that your product requires repair service. Canon has excellent service options and we are eager to provide any assistance you may need. Links to the service options that are available for your product are listed below:
Request a Repair Online You can conveniently pre-arrange repair service with a Canon Factory Service Center through Canon's website. Find a Service Location Search to locate a repair service center and obtain further instructions. If you still have questions about the issue you are experiencing, a Technical Support Representative will be happy to answer any question you may have. You can contact us through the email link or phone numbers listed below.

• Obtain Support by Email
  
• For toll-free technical support, please call 1 (800) 828-4040 during regular business hours (currently Monday-Friday 8:00 a.m. - 12:00 midnight. EST, Saturday 10:00 a.m. - 8:00 p.m., excluding holidays).
  
• Toll-free TDD Support Line for the Hearing Impaired is available Monday - Saturday (excluding holidays) at 1-866-251-3752
  
• Technical Support is available for Customers in Canada at 1-800-OK-CANON
  

SOURCE: FUJI FINEPIX F480 GET HANG AND CARD DOES NOT STORE IMAGES

i formatted it in cam only now it's workin good.....dont format in computer it will show this kind of errors

SOURCE: I have a Canon S1 IS which shows a purple image

I have the same problem and after doing research, I found this website.
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

I called Canon & they are sending me a prepaid shipping label to fix the camera free of charge! Hope that helps!