Robertson ap100dl...My boat was equipped with one..It is now missing. Do you know where I can purchase one?

They are here

Robertson PSP2GPH40HOIVDW Program Start UV Ballast

https://www.robertsonlighting.com > psp2gph40hoivdw

Product Status: Active/In Stock. Units Available: 2,000+ Electronic Program Start Ballast (for Preheat Start Lamps), 800mA nominal lamp current with an Arc voltage between 23V-118V, Input voltage of 100-277Vac, for 2/1 18W-36W Lamps or for 1 51W-95W Lamp, 50-60Hz, dual entry connectors (no leads) US$36.95 · ‎In stock

ROBERTSON PSP2GPH40HOIVDW Germicidal Ballast

https://ballastshop.com > Fluorescent Ballasts > T5 Ballast

Oct. 7, 2020 - The ROBERTSON PSP2GPH40HOIVDW UV Germicidal Ballast for GPH212T5HO, GPH287T5HO, GPH357T5HO, GPH436T5HO, ... Rating: 5 · ‎2 votes · ‎US$37.95 · ‎In stock

Robertson PSP2GPH40HOIVDW, Electonic, ballast, for ...

https://www.hmlighting.com > ... > 4-Pin Plug-In

PSP2GPH40HOIVDW. Electonic, ballast, for multiple UV lamps, 1 or 2 light, 120-277Vac, Rapid Start.

There are square head fasteners on electrical appliances. You need to stop by some hardware store or home depot.

I had a 1976 15 ft checkmate. Low sides. It was rated at 100 hp. A 100hp in those days was pretty big. My 90 was a 6 cal merc. Todays motors are much smaller for the same ratings. A 75-90 3 cyl should work nicely and be safe.

To The Hydraulic Cylinder Mounted At The front Of The Outboard,
If The Motor Is Not equiped With The Cylinder You Need To Purchase and Fit It to The outboard Engine
Hope This helps
Gordon

Kenwood TDF42D Detachable Faceplate may be purchased here:


http://www.partstore.com/Part/Kenwood/Kenwood/KDC225MR/Kenwood/Kenwood/TDF42D/New.aspx

I own a 1995 Four Winns and what you need is a Lowrance LSM-1 depth finder unit. It accepts the two pin lead from the transducer and send the depth reading to the dashboard display via the 6-pin connector. There is also a three wire harness (red/blk/wht) that connects to a power supply.

The reason I know all this is my depth finder fried a couple years ago so I removed the Lowrance LSM-1 from the boat in order to find a replacement. Unfortunately, this was an OEM part that is not available from Four Winns or any aftermarket source. Probably your best bet is to look in a boat salvage yard or purchase an aftermarket depth finder.

contact zf transmission in s.a on 0124107700 and speak to tony robertson or jaco

Hi- I have a 1996 Four winns boat with the same problem. I believe we are missing an adapter cable which goes from the depth cable to the instrument panel. I have not been able to locate this cable yet. If I find it I will let you know and can you do the same for me if you locate one?