SOURCE: the carriage on my Janome 350E will only move left
When my janome 350e did this I had to take it in to be calibrated and one month later it did it again and I had to take it back it has not given me any problems since but it would be nice to know how to do this myself it only took 5 minutes for this and takes me 3 hours there and 3 hours back. Hope this helps.
[email protected]
SOURCE: My carriage on my Janome 350E is jammed and is not
See if the embroidery arm is bent, that will jam the unit as it trys to move. If is bent you may be able to straighten my bending it gently. The arms get bent by tilting the machine to the back while the arm is exrended.
SOURCE: janome 350e how to adjust tension
Looping thread underneath is a top thread tension issue... I have written a 5 page illustrated Tutorial on overcoming this
problem....HERE
SOURCE: HAND WHEEL ON JANOME 350E HARD TO TURN AND MAKE SQUEAKING NOISE THEN JAMS.
Have you oiled it lately? under the bobbin there is a white colored "wick" one drop of oil (maybe 2 now).
It also might be time for a professional service.
Testimonial: "THE TIP ON OILING IS A GOOD IDEA. THE MACHINE < YEAR OLD. A DIFFERENT COLOR THREAD HAD GOTTEN PULLED INTO THE MACHINE AND WRAPPED AROUND THE WHEEL GEAR. I WAS ABLE TO PICK IT OUT WITH TWEEZERS. I'LL BEE MORE CAREFUL IN THE FUTURE. THANKS OF ALL YOUR HELP. I APPRECIATE IT. HAVE A BLESSED DAY."
305 views
Usually answered in minutes!
×