My comfort breeze split a/c is showing E1 in LCD display. What can I do about it?

NOTIFY COMFORT AIRE WE ARE NO PART OF THAT COMPANY

Cycle the power to the outdoor unit

If you need further help, reach me via phone at https://www.6ya.com/expert/thomas_092728000e6acb79

[PDF]Customer assistance for air filters cleaning (E1 code)

www.sharpusa.com/.../air_man_AFS100FX_S120FX_S125F...
Sharp SolarCustomer assistance for air filters cleaning (E1 code) on Sharp Air Conditioners. The display will indicate an E1 code and not allow the unit to operate until the ...

Sounds like you have the wiring backwards

can give the model of that aircon

Split type
E1 Indoor and outdoor communication abnormal
possible damage main PCB at outdoor units due to power supply problem.

room thermistor error

the E1 code is a communication error.First check for proper voltage at your condenser, then check all wire terminations between condenser and air handler. you should have LED's on your main board as well as your PFC board. if they show normal operation then chances are the main board is bad. be sure to check the ground .it must have a proper earth ground.

P 4 or p 0 code what is that

how do I know is my unit comfort breeze is inverter, 30 btu?

in our onida split ac it is Showing E5 as its display...what to do???