Question about McCulloch Garden

1 Answer

My mcculloch chain saw610 leaks bar oil badly which part would most commonly break

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • McCulloch Master
  • 2,931 Answers

I recommend contacting your local authorized service center for assistance.

You may contact the manufacturer, download manuals, check fuel/oil ratios, order parts, find your local service center, and view other resources using these links:

Contact us
User manuals
What is the correct fuel mixture for McCulloch products Chainsaw Trimmer...
McCulloch Service
McCULLOCH PARTS ACCESSORIES

I trust this information has proven beneficial.


my mcculloch chain saw610 leaks bar oil badly whic - helpful-rx44h4hsqebyqg3voy0wii3n-2-0_5.png

Posted on Mar 11, 2018

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: stihl 180 chainsaw,lack of oil to chain and bar

hi there i had this problem check bar studs make sure there tight bar must be flush on chainsaw body not on stud flange if bar is on stud flange there is a gap so oil leaks out near sprocket and not in bar oil channel

Posted on Apr 24, 2009

Anonymous

  • 1 Answer

SOURCE: McCulloch mini mac 35. Badly worn chain

you can go to youre local LOWES, or SEARS and pick up an oregon 14" S49 chain.

Posted on May 01, 2009

Anonymous

  • 42 Answers

SOURCE: I have a McCulloch 10 10 Automatic Chain Saw. What is the oil to

40:1 of two stroke oil roughly 2..5% 40 parts fuel to 1 part oil mixed Good Luck the Yeti

Posted on May 17, 2009

Anonymous

  • 173 Answers

SOURCE: Poulan-Pro 295 leaks excessive bar-chain oil

It's a seal somewhere either on the reservoir, or the 'feed' to the bar.
But in the short term, if you must use it, the simplest way of stopping the leak, is to not store it with any oil in it, until you locate the source of the leak.
That should help, but I'll wish you good luck never the less ;)
& plz don't forget to rate, thankyou :)

Posted on Aug 01, 2009

Dennis Sharp

  • 154 Answers

SOURCE: not much oil on poulan chain saw bar

there is some debris blocking from entering the bar and when sits it seeps out,clean bar and are under chain cover

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 mcculloch 3516 has new bar and chain when running chain will tighten to the point it will bog motor down


Check your brake spring. It may be broken causing the brake to drag. Plus replace melted side cover.

Dec 06, 2013 | McCulloch Garden

1 Answer

Bar chain oil in my mac 3516 chain saw leaking


Yeah, you'll need to get that fixed. I recommend contacting your local authorized service center for assistance.

You may contact the manufacturer, download manuals, check fuel/oil ratios, order parts, find your local service center, and view other resources using these links:

Contact us
User manuals
What is the correct fuel mixture for McCulloch products Chainsaw Trimmer...
McCulloch Service
McCULLOCH PARTS ACCESSORIES

I trust this information has proven beneficial.

helpful-rwwceix4simen0bu2pand4lt-2-0.png

Aug 18, 2012 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

My chainsaw leaks oil out of a small hole or drain just below the base of the bar. is there anyway to way to stop this


are you sure you aren't talking about the chain oiler system? There is to be a small amount of oil to lubricate the bar and chain.

Jun 01, 2011 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

McCulloch 14" chain saw Model CS 38 EM It quit


Most often there is a dust-oil clog in the bottom of the bar slot which closes an oil passage between the bar slot and the hole drilled half way through the side of the bar. This provides a passage between the thin shim plate with the two bar bolt holes beside the bar and through to the oil tank or pump output. You can remove the bar and chain and punch out the blockage in the bar with a paper clip if the chain is removed. Make sure the wire can be pushed from the bar slot right through the side hole in the bar. A gravity feed chainsaw should leak right out into the slot of the shim plate, a button pumper should squirt out there with the bar removed. With a button pumper you may have a tiny check valve in the line or the push button to take apart, replace the spring or unstick the ball inside the check valve. This is why they went to the gravity feed oil system which just leaks in there and gets picked up by the bottom of the links as the chain races past the passage between the bar side hole and the chain slot.

Mar 23, 2011 | McCulloch Garden

1 Answer

Excessive oil leaking while running from bar oil port


It might not be just excess. Try taking off the chain and bar and cleaning the groove on the bar with a wire brush and also the holes at the sprocket end. They could have build up of sawdustin them. Also dust out the cover and area around the clutch/sprocket. This should make a difference.

Feb 02, 2011 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

Auto oiler doesn't work


http://www.mccullochpower.com
you may need a new pump
check out there parts break down will help u find out what u need
you may not need a new oil pump you may just have blockage
clean the **** out of the parts behind the bar and clean the clutch good
the bar has the grooves the chain runs in and need to clean real good at the back where it bolts on and you will see a hole, thats where the oil goes into the bar so the chain can pick it up.
every 3 to 5 tanks of gas. or whenever you sharpen the chain you must clean the oil holes.
you may also have a pluged cap
the oil cap has a vent to let air in
if air cant get in oil cant get out. clean and inspect all the parts and you should find out if the oil pump is bad
you may just be as simple as needing cleaned
but with out oil you may have burned the pump, bar, chain , and clutch out of it.
hope this help
good luck

Nov 18, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

Chain oil keeps leaking out..how can I stop it ???


First, make sure you're using bar & chain oil, it's very thick and won't leak out like motor oils will. When you're done using the saw, store it with the blade side of the saw up. Not always convienent, but the oil will run away from the blade oil channels and not leak out.

Oct 22, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

I have a McColloch 16 in chain saw MS 1635 AV.


remove side cover,bar & chain.above bar mounting studs find a oblong channel that lines up w/ the small holes in the bar.clean everything,sawdust gets packed in the holes.if it leaks oil out the bottom,you need to replace the oil feed line fom the tank.

Sep 21, 2009 | McCulloch Garden

3 Answers

McCulloch Mac 120 oiler


I think the problem is the funny rubber-hose-connection of the oil tank to the oil pump. It looks quite flimsy to me... But if you want I can have a look how this screw is adjusted...Bye, also tom

Jun 18, 2009 | Standard Oregon Chainsaw Chain For...

Not finding what you are looking for?
Garden Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top McCulloch Garden Experts

roeb

Level 3 Expert

819 Answers

John Trevino

Level 3 Expert

1420 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Are you a McCulloch Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...