LeapFrog LeapPad2 Explorer - Green Logo

Related Topics:

S
Sarah B Posted on Jun 01, 2017

My child's leapfrog 2 thinks the batteries are flat. I put in new batteries, it comes on briefly, goes red with the 'flat battery' sign, then switches off. It was bought brand new, and worked well.

5 Related Answers

leecom72

Lee Hodgson

  • 4810 Answers
  • Posted on Jan 06, 2009

SOURCE: Battery wont hold a charge

Hi there
If the battery is not holding charge try draining the battery until it cuts out, after that put it on charge but don't turn the machine on while it finishes charging, this may well charge the battery to 100% as it is supposed to

Good luck and kind regards

Ad

Anonymous

  • 16 Answers
  • Posted on Feb 01, 2009

SOURCE: Leapfrog Clickstart doesn't switch off and doesn't work

You blew the circuit board by putting to much power into it. Never use more power then suggested for this reason. All adaptors have a volt and an amp rating. Sorry it happend best wishes!

Anonymous

  • 1 Answer
  • Posted on Mar 18, 2009

SOURCE: i got a leapfrog click start my first computer

yes there should be two parts. First there is the actual computer and the second is the base (where the games are connected to). The television should be set where you would usually watch a dvd/or play  a game(depending on what model tv) the computer is wireless so you can use it from the sofa etc. but you must have the base in order for the game to work. I just purchased one and my son loves it.

Anonymous

  • 2 Answers
  • Posted on May 04, 2009

SOURCE: My son's leapfrog didj will

This happened with the first Didj we bought. Struggled to open the battery case with the stupid recommended dime. [Use a screwdriver instead - better able to push down the lever inside the case.] The 1st Didj never turned on. Totally dead. Exchanged it. The second Didj was easier to open compartment to install batteries and turned on immediately. Reommend you take it back.

Anonymous

  • 794 Answers
  • Posted on Jun 14, 2011

SOURCE: My new leapfrog fridge words

Hi louconn,

Changing the battery will not really resolve the issue. It has something to do with the inside part of the toy. The most likely cause o f this are tabs that are pressed down or half pressed down. There are six per spot, which is how the system recognizes each letter. But since this is new. I would highly recommend that you send it back so you can a replacement.

Hope this helps.

Thank you for using FixYa.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

How to fix Leapfrog Leapster 2 electronic board?

Leapster 2 Customer Support ' Online Help, FAQ, LeapFrog ...

www.leapfrog.com > Support > Products

LeapFrog EnterprisesVisit our customer support page for LeapFrog's Leapster 2 for help and answers to your product questions.Missing: electronic ‎board

How to fix Leapfrog Leapster 2 electronic board? - Fixya

www.fixya.com/support/t26040145-fix_leapfrog_leapster_2_electronic
35 mins ago - ... 2 electronic board? I know how to solder and basic principles ofelectronic parts. Know - LeapFrog Leapster 2 Learning System question.

LeapFrog LeapPad2 Explorer Troubleshooting - iFixit

https://www.ifixit.com/.../LeapFrog_LeapPad2_Explorer_Troublesh...

iFixitDrained/bad battery; Bad display; Water damage; Bad logic board ... Instructions toreplace the battery can be found at LeapFrog LeapPad2 Explorer Battery ...

Leapster 2 Quick Fix Tutorial - YouTube

? 3:02
https://www.youtube.com/watch?v=eQayGCjEdgo
Jan 22, 2009 - Uploaded by filterdragon
Tutorial on how to fix your child's Leapster 2. If your Leapster 2has a problem other than the screen not registering the stylis pen, please go to the Leaps... ... Ana E 1 year ago .... 2:34. leap frogleappad repair guide.
0helpful
1answer

Battery went flat after light left on charged battery engine turns fine but wont fire up immobilizer light has not come back on I think immobiliser is stopping fuel supply ???

Does the light come on briefly, then go out when turning key to on? It should do that. Something is wrong with the pump if you turn key to on and the pump doesn't turn on for 2 seconds. It should turn on to put pressure in the line and to the injectors.
0helpful
1answer

Has been urinated on

remove the battery at once, cleanse it briefly in clear water, shake vigorously to remove excess water and dry in medium hot air... about an hour or 2, re-install the battery and try operating it again.
0helpful
2answers

The Save to Tag button on the leapfrog connact application does not do anything and so none of the audio will download from the library to the actual tag device

mine is doing the same thing. it's brand new. my daughter got it for christmas yesterday. i've even tried it on my husband's macbook. both our macbooks are up to date and her leap pad works. i'm about ready to take this stupid thing back to the store. it synced all the books except for her tangled book and will not sync again. i've even tried to restore back to factory settings and it won't even do that. i've deleted and reinstalled the leapfrog connect app 3 times. also seems that the stupid pen sucks down battery juice. i've put brand new lithium batteries in the pen and after 2 hours the pen is acting like it's dying and the only thing we've been doing is trying to sync it.
3helpful
1answer

I turn on my daughter's Leapster 2. I sign in. I click "Cartridge Game". The screen goes black & then It goes back to the "Leapster 2" screen, followed by the "if you...

You have to make sure that your Cartridges is clean. Try to vacum of blow both of the cartridge hole and also the place where you put the cartridge, Sometime very small tiny dirt will makes that the cartridge cannot be recognise by the console.

Instead of 1 starter game and a few demo game that you get from Leapfrog Connect, you can also get more downloadable games for your Leapster 2. You can get it here:
leapster-2.blogspot.com
0helpful
1answer

The sound my son's brand new Leapster 2 is not working. Batteries are brand new, volume indicator shows it is all the way up. Is there any hope for it? What do I do?

I am having the same issue. Devasted child as birthday gift won't work. After you choose name the screen goes blank. Please help:(
0helpful
1answer

I have a F6C800 and replaced the bateries. It seems to provide surge protection power through the 2 outlets but does not provide power through the Backup outlets. The monitoring software also does not...

OK - I'll ask the simple question first, so don't think I'm being crappy...
When you hooked the wires back up to the batteries that were replaced, did you hook them back up as they originally were? (I ran into this problem myself earlier today. I put one of the batteries in upside down and didn't have them hooked up correctly.)
Red terminal on the front battery goes to the black terminal on the back battery, then the black terminal on the first battery goes to the circuit board. Red terminal on the back battery goes to the power supply.
Hope that helps. It sure is a pain the change these batteries out.
15helpful
1answer

How to change battery on leapfrog tag? Trying to download new books from the on to tag but it says there is a problem with the connection. Can you help?

In order to change the battery on the tag "reading pen" turn it over and there is what looks like a flat head screw head on the back of the tag, it should be white. Give that a quarter turn and the back should pop off, ours was kind of tough to get off but after the back comes off you can replace the 2 AAA batteries. I believe the "pen" has to be turned on to connect to the computer so this might fix your connection problem also.
0helpful
1answer

Power goes out (new batteries) or starts making funny noises, screen goes crazy and turns off. Leapster 2

The item may be faulty if it is new. Otherwise some batteries are not a good enough quality to run certain electronics.
Not finding what you are looking for?

122 views

Ask a Question

Usually answered in minutes!

Top LeapFrog Toys Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a LeapFrog Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...