JVC EM65 FTR TV shut off and will not come back on

http://www.mouser.com/ProductDetail/Fujitsu/FTR-H1AA024T/?qs=%2fha2pyFadujoH9W9HeRXSyvSCD4ozqD6wWV7gD%2fVvik%3d
http://www.mouser.com/ProductDetail/Fujitsu/FTR-H1AA005T/?qs=%2fha2pyFadui8z3bTMsNq8TZCUfZthdd45ru8PUzU5yw%3d

Any malfunction associated with a flashing light usually indicates a circuit problem or defective component. Unfortunately, the days of taking off the back cover of your TV and replacing a defective tube or fuse are long gone. Proper servicing will require troubleshooting procedures that can only be performed by a qualified electronic repair facility or professional television repair person. Ask for an estimate and a realistic appraisal of whether the set can be adequately fixed. Depending on the age and condition of your TV it may not be cost effective to repair.

Philips FTR 9964 tries to switch on but light above power switch flashes red

Click JVC Support to download owner's manual of HD-61FH97 TV

The problem you describe is not really related to a timer function being set. The unit is in shutdown and the light is blinkng to let you know there is a problem.
There are several possible causes. the most common is a failure in the vertical deflection circuit due to a bad vertical IC and possibly a capacitor, zener diode and resistor.

we found that it is an auto shut off system on the TV due to over heating. The lamp, if not cooled correctly shuts down. We added a mini fan in the back and it seems to work fine now.

xcbsfbsf?

Is pix ok before shutdown?

If convergence is wildly misaligned then load may be shutting down power supply. Fix convergence and TV OK.

or

Poor solder connections on main chassis near FBTX and h drive. Needs expert solder work

[email protected]
calgary
http://calgaryconvergencerepair.weebly.com/convergence-repair-explanation.html

You need to fix power supply module (replace electrolitic capacitor on PCB) in your plasma. It's very frequently failure for this device.

The problem is in your cable connection on the back of your monitor or Box. I had the same problem and solved it by reattaching the VGA cable that was loose.