What is the meaning of this error 03130031-260E

what make and model printer is it?

Error 4 means the memory backup battery inside the Central Control Computer is dead or very low. Error 1 means factory defaults are being loaded due to a dead battery.

The "F1" error means that the dryer's thermistor failed and needs to be replaced. Make sure you check the dryer vent for clogs before installing the new part.

Hello,
Here are the common error codes for the LG machines.

LG Washing Machine Error or Fault Codes

If you have a LG Washing Machine you may see an error code come up and wonder what it is. Here are the common error or fault codes that will be displayed on the LG machine.

OE

This means that the washer has tried for ten minutes to drain the water out of your machine and the water did not drain out.

UE

This means that the load in the drum is out of balance causing excessive vibration when spinning.

IE

This means that the washer has not filled with water in 8 minutes.

LE

This means that the motor and the control panel are not talking to each other properly

PF

Power Failure – The power has gone out to the machine and then has come back on

FE

This means that there is too much water in the machine

PE

This means that the water level sensor is not working properly

CE

The washer motor has received and over current condition

TE

This means that your heating sensor is not working properly

SE

This means that you had a temporary sensor error

HE

This means that you had a temporary heater problem

DHE

This means that you had a temporary dry heater problem

This will give you a basic idea of what has caused your error code.


Heatman101

Error 30 is a Head/Carriage Unit travel error. It means the printhead is not moving. Error 50 means means the Purge Cam switch does not come on. This is part of the unit, which conducts the purge or cleaning operation.

This is in reference to another solution on this site--please search before posting as others have already solved this problem:

Per http://www.fixya.com/support/t2462964-all_3_error_lights_flashing_4_count_go


When all lights flash it's a service problem. You press and hold the go button and see what lights are on then.error light means main PCB failure, Toner light means fuser failure, drum light means laser failure. Toner and error light means main motor error, drum plus error light means its a fan failure.

Hello sir; It's means waste toner bottle full, dump it after you turn off the power, then turn power back on.

error code 3501 means the front access door is open on the printer. Error code 3502 means the paper tray is empty. The error code 3602 means the print job did not finish printing.

for more hrlp visit CBR Tech Solutions

there is an error no 9