I need code for mitsubishi tv with phillips universal remote

Rosie, links to your code below.
to show your appreciation press the helpful button and follow me on fixya for more tips and info.

How To Program Mitsubishi Remote Codes For Universal Remotes


4 digit universal remote codes for RCR3273 RCR3373 RCR4257 and R55L8 Code...



https://www.google.ca/url?sa=t&rct=j&q=&esrc=s&source=web&cd=6&cad=rja&uact=8&ved=0ahUKEwiotJrHkvrKAhUkkIMKHbOzAoQQFgg8MAU&url=http%3A%2F%2Fwww.directutor.com%2Fcontent%2Fge-universal-remote-instructions&usg=AFQjCNFezfKozrxDGrq0aRC8QyLajQ3aLQ

Control It All With Universal Remote Codes

Look in the manual of your
Phillips universal remote CL035A for ther listing of TV codes, take notes of codes for Sylvania and input codes accordig to instructions of your manual.
If you can locate Sylamia, follow instrucions for unspecified device.
You don't have a manual?

How to Program Philips Remote Control Without the Codes eHow

what is the your phillips remote model number? Model number is located under the batteries. then go to www.p4c.philips.com to get the codes...hope this helps

Find codes and methods here.
http://www.docstoc.com/docs/23925020/Programming-Remote-Control-Brand-Codes-TV-Sets

If those codes dont work try the last three(or four) numbers of your TV's serial number.

On my universal remote is just a matter of holding down the TV button till the light stays on, then punching in the three digit TV code. When the TV turns off it's the right code. But read your manual for your controller.

hi...
use the following link to see the remote code list for all kinds.....hope this helps you always.....

http://www.universal-remote.net/philipsmagnavox.html

if this has helped you then rate for my solution......

thank you.....

http://www.universal-remote.net/philipsmagnavox.html

Hi michaeljlent,

There are a number of codes for your remote that correspond to Phillips TV models. They are:

002 009 109 202 209 210 310 402 408 508 510 807 901 914 917

For your reference, here's a web address where all the codes for your remote are listed (along with programming instructions):

http://www.universal-remote.net/philipsmagnavox.html

I hope this helps - please let me know if I can be of any further assistance.

RCA remote code finder Check it out

need code for remote

For the majority of phillips/magnavox universal remotes: Hold code search button down till red light satys on. Press the tv button and the red light should blink and stay lit. With the tv on, push the power button repeatedly until the tv turns off.(dont push the power button again after the tv turns off or it will go to the next code). Push the mute button to save the setting.