SOURCE: bad recording from any source
The fact that both inputs give you a bad recording indicates its something common to both inputs. First thing I would do is try cleaning the heads. It's the cheapest solution to try. There is also an erase head as well, but that is usually not part of the video head. The erase head erases the tape just prior to the record head recording the new material on the tape. Problems in the erase head will cause you to see both what you just recorded and what was previously on the tape. The picture will be distorted and shifting back and forth between the new program and the previous one.
Good luck!
- Jim
SOURCE: bassinet assemlby-Kolcraft
We have borrowed a Kolcraft bassinet but cannot figure out how to put the liner on it to completely assemble it.
SOURCE: need instructions on folding and storing an 8 yr old pack n play
I have one that is about this old, so if it is the same one, the instructions for how to fold it should be printed on the very bottom of the play yard. If they are not, then try to pull the center part up halfway. Next, push up on each side where the arrows are and as you do this, it should start to collapse and you should be able to fold it completely by pulling the center all the way up.
Hope that helps!
125 views
Usually answered in minutes!
×