SOURCE: hammer drills and rotary hammers comparison
Basically yes. Lower power units are usually titled as "hammer drills." Higher power units, usually labeled "rotary hammers," tend to be larger and provide bigger impact forces. But there are a few differences that are worth knowing: The rotary hammer usually have a chisel only feature, for light chiseling and masonry removal. Rotary hammers also have specially designed chucks that only accept bits specifically designed to fit their chuck. The special chuck on a rotary hammer helps hold the drill bit and prevents it from slipping during use.
SOURCE: Sir, I have a Powerbase Xtreme Rotary SDS 1200W
http://manuals.syntigroep.nl/manuals.htm
have a look here, they have just about every owners manual on the planet
SOURCE: I have a makita hr2455x rotary hammer drill that won't hammer
you need to get that service,
the grease causes the hammering.
and probably too much pressure was applied
to it.
SOURCE: i have a makita hr300c rotary hammer drill.
it sounds like it needs new o rings and serviced. you can go to Makitatools.com and download a breakdown for this tool, If you are handy and take your time they are not that bad to repair. Let me know if you need more assistance.
SOURCE: which is the best rotary hammer drill to buy
Hi
yes it is a good tool all deppend on what kind of work you want to
do with it ,
just remamber this is not a jack hammer it is a light impact
Hammer Drill. and it is a problem free if it used for the right
work and load.
234 views
Usually answered in minutes!
×