Lands Phones Logo

Related Topics:

Wanda Crowe
Wanda Crowe Posted on Apr 20, 2017
Be the first to answer

HOW DO YOU RESET ANSWERING MACHINE ON 6.0 UNIDEN PHONE

I RESET PHONE TO RING 5 TIMES INSTEAD OF 3 AND NOW THE ANSWER MACHINE SAYS ON BUT WHEN YOUR CALL RINGS 5 TIMES SAYS VOICE MAIL NOT SET UP

Answer This Question

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 28, 2007

SOURCE: setting the number of rings to answer

Press "Mute" to setup handset, select "Ring to answer", here are 1,2,3,5,6,L choice. you can change to 3.

Ad

Anonymous

  • 84 Answers
  • Posted on Feb 14, 2008

SOURCE: changing the number of rings to answer on our Model 28112 GE Cordless phone

the voicemail ring count has to be setup on your phone line thru your voicemail menu,and has nothing to do with the answering machine. if you don't want the answering machine to pickup, just shut it off. follow the prompt's for your voicemail settings, there you'll be able to set the amount of rings you want.
hope this helps.
wg

Anonymous

  • 6 Answers
  • Posted on May 13, 2008

SOURCE: Voicemail

It sounds like you are using a voicemail service from a provider, meaning you did not buy the voicemail system with the phone system. If you confirm, I can tell you how to fix this.

Anonymous

  • 64 Answers
  • Posted on Mar 06, 2009

SOURCE: how to extend rings on phone before answering machine starts

Hello, here is the link to the manual for that model:

http://www.uniden.com.au/resources_main/pdfs/XSA660.pdf

The information is on page 28

Anonymous

  • 211 Answers
  • Posted on Jun 17, 2009

SOURCE: PHONE RINGS ONLY 3 TIMES BEFORE VOICE MAIL PICKS UP, NEED 5 RINGS

This is done on ext 10 or 11
Feature 00
Left intercom, left intercom
(for main aa)#506
Mode 1 for day, 2 for night
enter line number ex 01, 02 etc
input number of rings
Feature 00

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

My att cellphone only rings 4 times before voicemail
If the problem is with an AT&T cellphone you will need to call them or go log in online to change that feature, however if it is with a Uniden Cordless Phone (the product this question is linked to) the directions below found in their manual should help:

Uniden Cordless Phone
From the base
1) Press [clock/menu] three times. The base displays the current number of rings (2, 4, 6, or TS for toll saver) and announces the setting.
2) Press [>>/select] or [<</select] until the desired ring time appears.
3) Press [set]. A confirmation tone sounds, and the answering machine announces the new ring time.

From the handset
1) Press the MENU soft key. Select the ANSW. SETUP menu, and then the RING TIME submenu.
2) Move the cursor to select a Ring Time (2 TIMES, 4 TIMES, 6 TIMES or TOLL SAVER).
3) Press the OK soft key. You will hear a confirmation tone.

Hope this is of help
Read full answer
May 05, 2014 • Uniden Cordless Phone
0helpful
1answer

How do I extend the ring time on Uniden D1600?
The D1600 isn't an answering machine. Please refer to the documentation for whatever answering machine you have connected to your phone. If you need further assistance, feel free to reply to this post but be sure to specify the make and model of the answering machine.
Read full answer
Nov 05, 2012 • Uniden DECT 6.0 Cordless Phone ID
0helpful
1answer

I'm not sure how to set the number of rings before the answering machine picks it up. For example. instead of ringing 12 times for the answering machine to pick up, I would like it to ring 4...
Hi, 4 to 5 times is adequit. Nobody lets it ring 12 times. Most people hang up after 5 to 6 rings.
Good luck.
Read full answer
Jul 30, 2011 • Uniden DECT 6.0 Cordless Phone ID
0helpful
1answer

How to change the numbr or rings before...
1) With the phone in standby mode, press the menu/clock key three times.
You hear “Ring time” and the current ring time ([2 ], [ 4], [6 ], [T ] Toll
saver), and it is displayed on the main base. Then you hear the guidance for setting
the ring time.

2) Press the volume/select/ or up or down arrow key until the desired ring time appears.

3) Press the set key to select the new ring time. You hear a confirmation tone, then
the announcement “Ring time” followed by the new ring time. After a few
seconds, the system announces “To set record time, press menu again.”

Need the manual for your phone? You can download/print it here:

http://www.uniden.com/pdf/DXAI5588-2om.pdf

Bill B
Read full answer
Mar 04, 2010 • Uniden DXA15588-2 Twin Cordless Phone
8helpful
1answer

Would like to increase number of rings before answering machine comes on.
Setting the Number of Rings (Excerpt from the Uniden Dect 1580 Phone manual

The ring time setting allows you to set the number of rings the caller hears before your answering system plays the outgoing message. You can set the ring time to answer after two, four, or six rings. If you enable the Toll Saver (TS) setting, the answering system picks up after two rings if you have new messages, and after four rings if there are
none. This way, if you make a long distance call to check your messages, you can hang up after the third ring to avoid long distance billing charges.
  1. Press Menu/Select.
  2. Select the Ans. Setup menu, and then the Ring Time submenu.
  3. Move the cursor to select a ring time (Toll Saver, 2 Times, 4 Times, or 6 Times).
  4. Press Menu/Select. You will hear a confirmation tone.
Read full answer
Feb 02, 2010 • Uniden DECT 6.0 Cordless Phone ID
3helpful
1answer

"i have a uniden 6 0 dect2080 3 answering machine how to check the messages from a different phone"
The default security code is "80". If you have not reset that code, you will use 80.
This is all from the manual:
1) Call your telephone number and wait for the system to answer. If the answering system is off, it will answer after about ten rings and sounds a series of beeps.
2) During the greeting or the beeps (if answering system is off), press 0 (zero) and enter your security code within 2 seconds.
3) The answering system announces the current time and the number of messages stored in memory. You hear "To play incoming messages, press zero-two. For help, press one-zero" followed by a beep.
Then the manual lists all the remote commands. If you need those, you can go to uniden.com and download a manual.
Read full answer
Apr 13, 2009 • Uniden DECT 6.0 Cordless Phone ID
1helpful
1answer

Remote answer machine turn on
Most Uniden answering machines will turn on remotely after the 12th ring. Call your home phone and just let it ring, ring, ring.
Read full answer
Apr 09, 2009 • Uniden 5.8GHz Cordless Phone
2helpful
1answer

I have a uniden answering machine and i want to change the
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2

i downloaded the owners manual from uniden at the link above , and from what i see its on page 26 of this pdf manual ,

enter the answer set up menu , and then the ring time sub menu , press volume up / down to select a ring time ( toll saver , 2 times , 4 times or 6 times ) then press the "OK" soft key , you will hear a confirmation tone . good luck
Read full answer
Dec 21, 2008 • Uniden TRU8885 Digital Answering Machine
1helpful
1answer

Number of rings
Looks like 6 is the Max, according to the Manual.

Setting the Ring Time
 Ring Time allows you to set the number of rings the caller hears before your
answering system plays the outgoing message. You can set the ring time to answer
after two, four, or six rings. If you enable the Toll Saver (TS), the answering system
picks up after two rings if you have new messages and after four rings if there are
none.
1) Enter the Answ. Setup menu, and then the Ring Time
submenu (see "Entering the Menu Option" on
page 16).
2) Press volume up/down to select a Ring Time (Toll
Saver, 2 Times, 4 Times, or 6 Times).
3) Press the OK soft key. You will hear a confirmation tone.

Toll saver is a feature where you can call the phone yourself, if there are messages it wil answer in 2 rings, if not it'll answer in 4 rings. The idea is to hang up on the 3rd ring and save the LD changes.

Hope that fixed Ya...

Geno
Read full answer
Mar 27, 2008 • Uniden TRU8885 Digital Answering Machine
3helpful
1answer

Changing the number of rings to answer on our Model 28112 GE Cordless phone
the voicemail ring count has to be setup on your phone line thru your voicemail menu,and has nothing to do with the answering machine. if you don't want the answering machine to pickup, just shut it off. follow the prompt's for your voicemail settings, there you'll be able to set the amount of rings you want.
hope this helps.
wg
Read full answer
Feb 14, 2008 • Uniden Cordless Phone
Not finding what you are looking for?

View Most Popular

Lands Phones

Related Question

My att cellphone only rings 4 times before voicemail

  • Uniden Cordless Phone

2,937 views

Ask a Question

Usually answered in minutes!

Popular Questions

How to take silent mode

Uniden DECT 2080-5 Quint Phone

Panasonic cordless handsets all say line in use

Uniden Cordless Phone

Red message light is blinking on my Uniden phone

Uniden 2.4 GHz Expandable Phone...

I have 2 uniden phones. When you push talk on either one it says out of range. I have tried hanging them up in the base. I have also unplugged the batteries and let them sit for a while. After con

Uniden Cordless Phone

Lost manual for the GE DECT 6.0 Cordless Digital Phone # 28115FE1

Uniden Cordless Phone

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8093 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
TRU9488om.pdf. user-manual-TRU9488...

Uniden TRU9488 Phone

PDF Manual
EXA2245.pdf. user-manual-EXA-2245 2.4...

Uniden EXA-2245 2.4...

PDF Manual
EXA7950.pdf. user-manual-Exa 7950 900...

Uniden Exa 7950 900...

Loading...