Found the solution for my machine with exact same symotoms: the hard water had covered the infrared source and/or receiver. They are opposing black and transparent 3mm circles on the left and right wall when you look inside your icemakee. They are supposed to detect if ice cubes pile up so high that they fisrupt the direct liner of view between those 2 dots.
Just clean them with a wet acidic solution to clean of the hardness, e.g. use vinegar or lemon juice.
Worked for me.
SOURCE: Igloo model ICE108. Why does the ice full light stay on when there is no ice in the basket?
Because the ice level sensor is stuck in the full or up position. As long as it is there, the ice maker is shut off and will make no ice.
The tray full may be triggered or stuck or another problem may exist. Look for what senses the ice being full and also check with Curtis support:
(another person was tld to do this and it workd:
1. turn machine on . 2. press the select button for 10 sec. then 3. press the power button for 10 sec. and then turn off the machine and unplug it for 6 hours.
I included some links for your convenience. Good Luck
1 How to fix portable ice machine part 1 of 3
Troubleshooting Portable Ice Makers
Igloo ICE102 WHITE User Manual Troubleshooting Guide
Igloo ICE102 WHITE User Manual Troubleshooting Guide
Igloo ICE102 WHITE Manual Online...
13,209 views
Usually answered in minutes!
×