Question about Riccar Sewing Machines

Open Question

I have a riccar 4250. The feed dog won't feed the fabric through

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MakikiChris
  • 84 Answers

SOURCE: My fabric won't advance.

Hi Jodyk...Remove your flatbed so you can access your bobbin area. Open the cover of the bobbin area. The shiny/bright components consist of the Bobbin, which snaps into the Shuttle Hook, which is contained in the Race. Immediately right of the Race is a pewter/matte silver colored lever. Press the lower portion of the lever to raise the Feed Dogs. Pressing the upper portion drops the Feed Dogs, and is commonly used to accomplish free-hand applique work......good luck my friend.

Posted on Aug 02, 2007

Ad
  • 19 Answers

SOURCE: My kenmore 385 won't feed fabric

hi there check feed dogs are up not down mary h




e

Posted on Dec 30, 2008

louislevel_2
  • 374 Answers

SOURCE: Kenmore Model (385.15108200) Fabric not moving

hi! there if your feed dog does not move the fabric forward or backward,if this is so try to run machine w/o the fabric check if feed dog move on cycle,the teeth should be moving upward and downward rotation pushing action on your fabric,the teeth should come out to the plate slot of feed dog.if not adjust upward, and adjust also the presser foot of needle.if your feed dog is not moving when machine running,thre is a mechanical disengage or loosen in shuttle assymble and feeder dog mechanism they link together ubder the machine,as the shuttle move on one stroke the feeder also move also with the needle.Chesk the adjustment and link mechanism.in addition to this try to clean feed dogs by brush chips thread and fabrics sometimes stored on mechanism of feed dogs and shuttle.

Posted on Mar 19, 2009

  • 323 Answers

SOURCE: My kenmore 385 won't feed fabric

Check to see what pattern is selected. Be sure it isn't the buttonhole.Select straight stitch.Move the stitch length setting to 4.Turn the handwheel and see if the feed dogs move forward. Press the reverse lever and see if they move backwards. Select straight stretch stitch and turn the wheel to see if the feed dogs move forward and backward.Check the presser foot release on top of the machine and make sure there is pressure on the foot.
Sometimes the reverse assembly on this machine stops working because it has the wrong type of grease on it and it turns into a hard gummy mess that won't let it work.
sewman7

Posted on May 16, 2009

Zenqi
  • 208 Answers

SOURCE: I have a Singer Stylist 513 & I cannot get the feed dogs raised.

The model 513 Singer has two gears which operate the feeding mechanism. If one of these gears is broken, the machine will run except the feed dogs will not move. This is a very common problem with this model.

Posted on Oct 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, My Elna 7000 doesn't easily feed medium or thin fabrics. Presser Foot tension lever is position 2 and the Feed Dog is rising normally. Any thoughts please? Does the F Dog wear out in any way?


Generally, the lighter the fabric weight, the heavier the presser foot pressure. Yes, feed dogs do wear with use. Do not run the machine without fabric between the presser foot and the feed dogs--the feed dogs constantly rubbing against the presser foot will quickly wear the feed dog points. Store the machine with the presser foot down with a pad between the presser foot and feed dogs (even a scrap piece of fabric will do). Also, be sure to clean the feed dogs of any gunky build-up. If the feed dog points are worn, it may be worthwhile to have them replaced.

Jan 23, 2017 | Elna Sewing Machines

1 Answer

Fabric won't move threw machine, feed dogs are working.


Try adjusting the pressure on the presser foot, or make sure your feed dog are in up position and moving forward

Jan 06, 2013 | Sewing Machines

1 Answer

Feet not feeding and thread bunching up


the presser foot or what ever foot your sewing with does not feed the
fabric,, the feed dogs in the needle plate are what moves the fabric
to be sewed, the feet only hold the fabric against feed dog so the
machine can use the needle to sew the fabric.
if the fabric is not moving then the feed dogs have to be checked
can you see the feed dogs in the needle plate area are the up or
down?
do you have a manual for the machine?
a manual help to know where the feed dog lever is, I'm sending
you a link for a manual for the machine, so you can look for the feed
dog lever, if the feed dogs are up then there is something wrong
with the feed dogs & they need to be checked.
but if the feed dogs are down then look in the manual & see where
the feed dog lever is & put it in the up position & see if that brings
the feed dogs up to the sewing position, if the feed dogs do not
come up then the feed dogs need to be checked.

http://www.sewingpartsonline.com/instruction-manual-necchi-6015.aspx

Oct 16, 2012 | Necchi 6015 Mechanical Sewing Machine

1 Answer

Feed dogs won't move


No info on the sewing machine make or model. It sounds like something is binding up, is bent, or is tangled in the machine. Look around the front and back of the sewing area for a switch to lower the feed dogs.

Good luck

Oct 05, 2012 | Sewing Machines

1 Answer

I have a JukiLU562 and fabric won't move starting to sew


the feed dogs are what move the fabric thru the machine to sew it
if the feed dogs are not working, then they need to be checked
to see if they have some loose or broken or need to be retimed

Jun 05, 2012 | Juki Sewing Machines

1 Answer

O.comI'm having a couple of problems: it seems like the feed dogs need to be adjusted because I need to gently pull the fabric through, from the back, otherwise the fabric won't advance & I...


if you have a manual check where your feed dog knob is, push the knob in the opposite direction,,if that doesn't help then something may be wrong with the feed dogs,,you should be able to see the feed dogs in the needle plate area & to feel them with your fingers.
you may need to have the machine serviced at a sewing shop

Sep 21, 2011 | White Sewing 1730 Mechanical Sewing...

1 Answer

My Janome Harmony 1017 won't sew all the zigzag stitches. Stitches 5,7 and 8 bog down after just two or three stitches because the fabric isn't moving through the machine. Any suggestions?


when the fabric does not move then the feed dogs under the needle plate need to be checked to see if there up or down.
if the feed dogs are down then the lever or switch needs to be pushed up into the correct position
if the feed dogs are up & they are not moving the fabric like there suppose to, cause it's there job to move the fabric against the presser foot,, then they need to be check

the gears that do the zig zag stitches should be checked to make sure there not worn & weather they might need be be greased

Aug 29, 2011 | Janome Harmony 1017 Sewing Machine

1 Answer

I need to lower the feed dog on my 808. The


There may not be an option. Try this - set the stitch length to zero. This should stop the movement of the feed dogs.

Tape an index card over the feed dogs with a hole punched out for the needle to enter and exit.

Feb 20, 2010 | Riccar R552

3 Answers

Kenmore Model (385.15108200) Fabric not moving


hi! there if your feed dog does not move the fabric forward or backward,if this is so try to run machine w/o the fabric check if feed dog move on cycle,the teeth should be moving upward and downward rotation pushing action on your fabric,the teeth should come out to the plate slot of feed dog.if not adjust upward, and adjust also the presser foot of needle.if your feed dog is not moving when machine running,thre is a mechanical disengage or loosen in shuttle assymble and feeder dog mechanism they link together ubder the machine,as the shuttle move on one stroke the feeder also move also with the needle.Chesk the adjustment and link mechanism.in addition to this try to clean feed dogs by brush chips thread and fabrics sometimes stored on mechanism of feed dogs and shuttle.

Mar 19, 2009 | Kenmore 15208 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Riccar Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Joseph Mueller
Joseph Mueller

Level 2 Expert

346 Answers

Tom Chichester

Level 3 Expert

51898 Answers

Are you a Riccar Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...