At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
11 linear feet
linear measurement is a length measurement
when you multiple the two measurements it becomes a square ft measurement
in this case 121 sq ft
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You get square feet by multiplying linear feet with another linear feet. 18 sq.ft = 3 lin ft x 6 lin ft or 2 lin ft x 9 lin feet or 4,5 lin ft x 4lin feet.
Sq ft is used to quantify surface area where linear feet quantify distance but lin ft x lin ft gives you square ft (surface area)
19" . Linear is length.
Linear feet (often called Lineal feet) are the same as regular feet. No conversion is necessary. If something is 6 linear feet tall, it is 6 feet tall. It should be noted, that the correct term is Linear, since Lineal refers to a line of ancestry, not to length.
Applies to inches also.
Hi Mona:
I'd like to be able to help so will need to clarify the intent of your question. Bear with me while I explain.
- 264 sq ft is a measurement of area.
- Example: a room 11 ft wide by 24 feet long would have a floor area 11 X 24 = 264 sq.ft
- 264 linear ft is a distance measurement, and indicates the distance between 2 points.
- Example: A house that is 66 feet square has a perimeter of 264 linear ft. (4 x 66 = 264)
If you can take this information and apply it to your question, I should be able to give a clearer answer.
Hope this helps
The following should give a good idea what is. HINT: It is 12 linear inches.
Linear feet (often called Lineal feet) are the same as regular feet. No conversion is necessary. If something is 6 linear feet tall, it is 6 feet tall.
It should be noted, that the correct term is Linear, since Lineal refers to a line of ancestry, not to length.
There are times when the term Linear is used, and times when it is not. I'll give some examples of them.
First a definition. Linear means "a straight line" so a straight line from point A to point B is the linear distance.
One example would be... It is 2200 linear miles from Seattle to Washington DC. But if you were to drive from Seattle to Washington DC, you would have to drive 2700 miles. The linear distance is a straight line from point A to point B, and Freeways rarely are straight.
Another good example would be boards, wire fencing, and rolls of cloth, all of which are often sold in linear feet. That just means they are not taking the width into account. If you bought 100 linear feet of lumber, laying them down end to end would stretch for 100 feet, it wouldn't matter how wide the boards were. If you were to multiply the width of the board, or the width of the roll of cloth, times the linear length, you would get the area.
The same applies for linear yards, linear meters, etc
Linear means long. Height has nothing to do with linear. If I have 2 sidewalks, one 8 feet wide 30 feet long, other 2 feet wide 30 feet long. They are each 30 linear feet.
That depends on the length and width.
24 feet 11 inches by 1 inch is about 2.01 square feet.
24 feet by 1 feet is 25 square feet.
20 feet by 5 feet is 100 square feet.
12.5 feet by 12.5 feet is 156.25 square feet.
Linear feet is just the length of the fence in feet.
Linear just means how many straight feet it is.
Hope this helps.
Please be sure to rate my answer.
Thank you.
It equals zero square feet.
Linear feet is only one dimension (length). You need 2 dimensions to calculate square feet. In other words, you need *width* also.
But IF you're asking how many square feet is 9 linear feet (long) by 9 linear feet (wide), then the answer is 81.
×