Would like to change the Ship's Name, MMSI and Call Sign, anybody can help on the Furuno Fa 150 AIS???

This is the official line

Can I change the MMSI number entered into a VHF radio or AIS unit?
Once entered and confirmed, the MMSI number can only be changed by a certified technical dealer. If you need your number reset or changed, it is recommended that you contact the organization or agency which originally registered your MMSI. For more information about MMSI numbers, go to the United States Coast Guard website at this link.

And

https://www.justanswer.com/boat/au99m-received-emailed-info-from-simrad-reset.html

This doesn't sound hopeful!

https://mt.panbo.com/2015/07/simrad-ai50-mmsi-reset.html

Full story

https://www.google.com/search?q=reset+Simrad+AI50+ais+to+a+new+MMSI

..

n the system setup, under “UNITS” I set BEARING to “MAG” (magnetic). This will cause the unit to display course / bearing information in relation to the Magnetic North and match magnetic compass readings. It is not the same as True North! One has to be careful with this setting. There are a number of areas where the earth's magnetic field is locally disturbed, sometimes very significantly. Your GPS may not account for it. - again, under “UNITS” I set “METRIC”.

we are not Password fix dot com.. we do not hack PW here
in fact doing that now is ILLLegall .
it is not any computer, at all .
it is 2008 , 12years old.
lost the manual? google finds it 2nd hit.
a Marine VHF radio, did kid play with it and lock it out? or?
what need to do is reset the radio, (ask maker yet?)
or just changing the
Maritime Mobile Service Identity

???????????????????????????
why not be clear on what works and not. both matter.
if yes,
read this
https://www.boatus.com/MMSI/MMSI/Home

303030 try this is a original one

This requires a secret dealer only pass word to enter the set up on the FA 150. Call me
847-746-0100, John Barry

SARACOM AIS SA-10 Password "130708"

Press VIEW
Go to Settings
Go to STATIC DATA
Press EDIT
Enter 1234 ( Master P/W)
Press OK
Press EDIT & SHIFT
Press DELETE (Old Data) & Enter New Data
Press OK to go to CALL SIGN
Press Shift (for changing Numeric to Alphabetic)
Go to SYSTEM
Go to SYSTEM CONTROL press OK
Restart the system to STORE NEW DATA

I have tochange themmsiofan apparatusfurunoaisFA100, you knowyour password?thanks

set io port speed for ext io 4800 on opencpn works ok

The following web page is the manual for your device: l
http://www.furunousa.com/ProductDocuments/FA50%20Operator's%20Manual%20B%20%207-08-09.pdf
On page 26 you will see the instructions for the password. Please note that the password is known only by the dealer, so you will have to get it from them. I could find no reference to a resetting of the password, and this appears to be a security precaution established by the manufacturer.
You will have to get the password from the dealer.
Good luck, and hope this helps.

If the AIS targets are out compared with radar target then turn compass to superimpose radar on to AIS.
If the AIS info is out compared with chart then suspect GPS. This could be yours or theirs depending on how many targets are out and whether it consistantly in one direction.
Good luck
Mike