HP Photosmart D5160 Error Code C4EB8000 - HP Photosmart D5160 InkJet Printer

JDTec

• 4338 Answers
• Posted on Nov 30, 2008

SOURCE: Flashing red light won't correct on HP Photosmart D5160 printer

Here is a HP document that explains what the blinking lights mean and how to fix it:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c01041365&dlc=en&product=1155996

copy and paste the link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

SOURCE: HP photosmart C 5283:message on blue display 83C00020

Your scanner unit has failed. Uneconomical to get repaired.

SOURCE: problem of my printer photosmart d5160

I have the exact same printer. Struggled for hours with it, until I learned it's ways. If you have good cartridges in and purge your print buffer from your computer, then 'gently but firmly' slam the top cover.
I don't see sensors, etc that detect it being up, but I just closed mine, had ! blinking, etc. Then gently 'slammed' the top cover and it reset and worked great.

Nalin DSouza

• 224 Answers
• Posted on Jun 17, 2009

SOURCE: Won't power on

The product uses a power cord, if the power supply is a power cord with electrical connections at each end. Figure 1: Power cord The product uses a power module, if the power supply is a power cord connected to a power module. Figure 2: Power module

• If the product uses a power module (adapter), go to Step two: Check if power is supplied from the power module.
• If the product uses only a power cord, go to Step three: Check if power is supplied from the power cord.If the product uses a power module (adapter), follow these steps to make sure that power is properly supplied to the product. Figure 3: Power module
  1. Check the power module part number against the part number listed in the User’s Guide to make sure that the proper power module is being used.
  2. If the power module has a permanently attached power cord, do the following.
     1. Disconnect the power cord from the wall outlet.
     2. Disconnect the power cord from the product.
     3. Wait 30 seconds.
     4. Reconnect the power cord to the product and the wall outlet.
  3. If the power module has a detachable power cord, disconnect the power cord from the power module and reconnect the power cord to the power module.
  4. If the power cord was plugged into a surge protector or power strip, plug the power cord directly into a wall outlet instead.
  5. If the product does not turn on, or the power light built into the power cord does not glow, plug the product into a wall outlet in another room.
     • If the product or power light turns on when connected to a wall outlet in another room, there is an issue with the power supply in the previous room.
     • If there is still no power to the product, then the power module, power cord, or product might be defective. Proceed to the next instruction.
  6. Connect the power module or power cord to another HP Deskjet or Photosmart product to see if the power module is functioning.
     • If the power light does not glow, the power module might be defective. Replace the power module and the power cord.
     • If the power module or power cord works on the other product, the product facing the issue might be defective. Proceed to Step four: Service the product.

1. Inspect the power cord for visible damage.
   • If the power cord is damaged, replace the power cord.
   • If the power cord is not damaged, continue with the next instruction.
2. Disconnect the power cord from the wall outlet.
3. Disconnect the power cord from the product.
4. Wait 30 seconds.
5. Reconnect the power cord to the product.
6. Reconnect the power cord to the wall outlet.
7. If the power cord was plugged into a surge protector or power strip, plug the power cord directly into a wall outlet instead.
8. If the product still does not turn on, plug the product into a wall outlet in another room.
   • If the product turns on when connected to a wall outlet in another room, there is an issue with the power supply in the previous room.
   • If there is no power to the product, then the power cord or the product might be defective. Proceed to the next instruction.
9. Connect the power cord on another HP Deskjet or Photosmart product to see if the power cord is functioning.
   • If the power cord does not work on the other product, the power cord is defective. Replace the power cord.
   • If the power cord works on the other product, the product facing the issue might be defective. Proceed to Step four: Service the product.

SOURCE: hp photosmart error code 0xc05d2381. does this

french oeioe