Acer Aspire 6920 touch volume not working

Download the acer`s programs and reinstall from here
http://www.acer.co.uk/acer/service.do?LanguageISOCtxParam=en&miu10einu24.current.attN2B2F2EEF=3734&sp=page15e&ctx2.c2att1=17&miu10ekcond13.attN2B2F2EEF=3734&CountryISOCtxParam=UK&ctx1.att21k=1&CRC=3713735360

upload a new driver, or install it again

Remove your battery and put it in again, this should solve the problem.

I have the same problem. The onliest thing is that I can't adjust the leds with the volume control center either...

I have problem in ISATAP Adapter #4

Mine froze once too, all you have to do is take out the battery for a few minutes, it resets the hardware...it is not a software problem like many people think it is, it has worked for many people and my touch pad has worked fine since and it has been almost 10 months.

yes mine did that too, i believe that it has something to do with messing with the volume before the drivers load, that means that if you mess with the volume in a different operating system, during boot, at the welcome screen, or during shutdown....you miss align the pad lights with the OS volume level, so next time you shut down drop your vol. in the software to ZERO, then on startup get the touch pad to ZERO, (not mute) before windows fully loads and you login

hello, have you tryed adjusting the sensitivity of the touch pad to a less sensitive touch ?

Try reseating the keyboard and see if that solves it. Occasionally the keyboard connector can get knocked loose.


Try and find a guide at simplyadapters.com/repairguides.html

Functions are activated by simply tapping
the function with your finger, while you can adjust volume by sliding your
finger around the volume meter.
CineDash reacts on commands with a little “lag”, if you use it carefully you can expect no problems, but for nonchalant usage CineDash will not react on every touch. You also have to make sure that it's turned on for it to work.