The screen on my JVCGZMG750 camcorder does not comes on when flap is open. It only comes on when the flap is flipped and turned back ways.

Try removing the batteries, plugging into your computer, popping the batteries back in, and removing. Wait 5 minutes, and plug back in! This should have an affect!

Service 21 refers to your humidity control valve (climavalve) did not make a full revolution in the time allotted (about 20 seconds). Pop open the front control panel by inserting and turning a 5mm allen key into the opening on the top of the oven. While the oven is at the home screen, flip the dip switch #1 on the back of the control board to the up or on position. On the screen you should now see a new icon resembling some tools, like a wrench and screwdriver, click this icon. Go to Basic Settings and scroll to the right once until you come to Basic Settings 1.2. It should say drain valve and flap with some numbers at the bottom. F-t is the number we want to focus on, take notice of the number there, usually 18-20 seconds. Push the start button to the right of flap, this time will change to 0 while the flap is re-initializing. After 20 seconds or so a new number should come up, if it doesn't or it is over 20 seconds by a lot then you need to replace your humidity control valve.

Additionally every time you turn on your oven the climavalve will cycle, checking to make sure it is working correctly, if you interrupt this cycle by powering off the oven you can simulate this error falsly, to rectify the error turn off the oven and turn it back on and wait a good minute for all of the self testing components to finish their checks.

Will the camcorder let you go ahead and complete "SETUP"?? if so, go ahead and redo the setup maybe some glich and maybe doing setup again may get the camera going again? hope so!! I have one also and knock on wood, no problems so far. it may be worth a try:


when camcorder turns on: when Flip Video Logo comes up press and hold RECORD button, to enter setup mode use the + and - to adjust current setting and the left and right arrows to select other settings

good luck!

in dash flip tv dosent come allthe way out

At least the following works on my first generation Flip Ultra camcorder (not Mino). Remove battery, put it back next morning. After that be careful not to touch "on" slider switch on the side of the camcorder while Flip logo is still on the screen. I mean turn the device on by using the slider switch and do not touch that switch again until Flip logo on the screen is gone. Doing the opposite (trying to use the "on" switch again while device is still "booting" and Flip logo is on the screen) will lead to the Flip Ultra freeze.

Flip video Camcorder is a creative digital device produced by Pure Digital Technologies. Four series include: the Flip Ultra, the Flip Ultra HD, the Flip Video Mino, and the Flip Video Mino HD. Flip video Camcorder records video in .MP4 format, which is compatible for iTunes, iMovie, QuickTime Player. However, it is not understood by Windows Media Player and Windows Movie Maker. Is there any way to solve the problem?

iOrgSoft Flip Video Converter is an intimate friend of Flip video Camcorder. Owning it, you can encode flip video to common video formats: AVI, MPG, MPEG, WMV, FLV, SWF, MKV, VOB, DV, 3GP, MOV, RM, RMVB and extract audio track from the referred video formats to MP3, WAV, WMA, AAC, AC3, MP2, AMR, AIFF, FLAC, M4A, MKA, and RA files.

If you need to edit flip video in Windows Movie Maker, set the output profile as Raw AVI, MPEG-1, or WMV format, and then import the converted files into WMM. Like to enjoy the captured flip videos on your iPod, iPhone, Apple TV, PSP, Zune, BlackBerry, Gphone or other MP3/MP4 players? Just set the corresponding device profile.


Reference:

How to import Flip video files into Windows Movie Maker?

Simply closing the flip open screen should turn it off or there is a power button under the screen.

flip switch is not working or stucked, a loose wire connected to this switch is also possible. you may open the unit and check for it. a pro fix is better.

Hello, in order to repair this Camcorder you should replace the LCD panel flexible cable FP-185 and the plastic hinge cover. If you need more info please advice. Best regards. Arpi

Sounds like you have a bad connection on the ribbon cable to the view screen. When you turn it 360 degrees that is a different connection. It should be an easy fix for a competent repair tech and should not be that costly, less than $100. Unless you are familiar with miniture electronics it would probably be beyond your capabilities. Two websites which offer free estimates are http://www.camcorderrepair.com or http://www.videotech.com Good luck.