I just bought a raymarine c 70 with an evermore sa 320 gps, can anyone help with the wiring i have to do as i seem to have misplaced the instructions which came with the sa 320.

Question 1

0helpful

1answer

Raymarine 4000 + autopilot. I immediately get an RG Fail message when I engage the autopilot on my Catalina 320 Sailboat.

I am not familiar with your particular model autopilot, but I do know that Raymarine autopilots can be fussy. All must have a compatible gps feeding it, of course. All must have a rudder angle indicator if your auto pilot connects to the wheel or rudder instead of directly to the tiller.

I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_f6ca18ca1db028ed

Aug 25, 2017 • Raymarine Boating

3helpful

1answer

What is the connection path from Garmin 72 to raymarine c80, using NMEA 1083

I'm taking this as you want to send the gps information to your C80 not receive from the C80? If this is the case the brown wire on the garmin is the nmea data out +. The Black wire is considered nmea out neg (-) of the garmin. So hook the garmin brown to the white on the raymarine. Hook the black from the garmin to the green on the raymarine. That means you are outputting lat/long info to the raymarine from the garmin.

Jan 14, 2012 • Raymarine C80 GPS Receiver

0helpful

1answer

Just interested on ''how'' the Autohelm ST1000 Plus works! is there somewhere on the net that I can check, I just bought a boat with one one it and I know how to make it work, but I want to...

Hi!
The ST1000+ does not have an internal GPS. What it does have is an electronic compass underneath the keypad. When you order the Tillerpilot to steer to a bearing, the unit uses the electronic compass to steer using a series of corrections.

Just in case you've misplaced your Owners Manual, you can use this link to download it to your computer: http://www.raymarine.com/productdocumentfinder.aspx

Click on your language preference, then Autopilots from the drop-down menu, tillerpilots and finally ST 1000+. The pdf file for your unit is 81130_6.pdf

Hope this helps and happy boating!

Jun 14, 2011 • Raymarine St1000 Plus Tiller Pilot

0helpful

1answer

I bought a RayNav 300 GPS on ebay and it came without a power cord. Can you help me locate one?

You are looking for part number e32024 (fits raynav 300 and raychart 320). What kind of jack does the power cable plug into? You may be able to have one made. A good marine electronics shop should be able to help you out.

Apr 20, 2011 • Raymarine Raynav 300 GPS Receiver

2helpful

1answer

Connect Ratheon RL 70 to Raymarine E80

The two devices can share Nav data only. No radar, Sonar or Chart will be shared.
Hook the RL70 and the E80 together on SeaTalk and all data will be shared both ways. Alternatively, it could be done with NMEA 0183, which is directional, or you could also translate the RL70 data to NMEA 2000 and share it that way. As long as you have all Raymarine equipment, you are home free using a three wire Seatalk connection, with only two hooked up, Yellow and Bare, color to color.
Remember, this will share Nav Data only.

Nov 14, 2009 • Raymarine C80 GPS Receiver

1helpful

1answer

I Have a Raymarine Radar RL70CRC HSB2 the

If both plotter works but they have no comunikation
RESET the RL 70 AND L760
This is how it works
press the powerbutton when you have picture press the menu bottom
than systemsetup and than four seconds the menu bottom.
Do this on both plotter normaly after this it works again

Jun 11, 2009 • Raymarine RL70CRC GPS Receiver

0helpful

1answer

Need to connect NMEA0183 to radio

Thank you for your quick respond.

I downloaded the owners manual and it had all the informaion I needed.

May 24, 2009 • Magellan GPS 320 GPS Receiver

0helpful

1answer

Which wires to connect when connecting a marine antenna to a raycraft gps

Hi. I have G series Raymarine and I listen the noise when swtich on I am not shure , may be from the ventilation (the fan).
I not find troubleshooting to G raymarine, I hope find the soulatoin thanks.
regard
kareem

Aug 03, 2008 • Raymarine RL70CRC GPS Receiver

0helpful

2answers

RAYMARINE C80 SEATALK CABLE INSTALLATION

The C Series units have a specific cable that connects directly to the DSM. The GPS antenna has multiple wires that will need to be connected to the "SeaTalk" port on the C80. The SeaTalk cable comes with the display. The GPS connects as indicated in the following link :

http://raymarine.custhelp.com/cgi-bin/raymarine.cfg/php/enduser/std_adp.php?p_faqid=1359&p_created=1222441077&p_sid=aIunftHj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MTUsMTUmcF9wcm9kcz03LDczJnBfY2F0cz04NiZwX3B2PTIuNzMmcF9jdj0xLjg2JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD13aXJpbmcgdG8gQzgw&p_li=&p_topview=1

Jul 31, 2008 • Raymarine C80 GPS Receiver

4helpful

2answers

Can't get updates for ICN 320

I have a ICN 320 Navman and it took 20 to 30 mins to connect to Satalites that is untill yesterday morning when I Updated the Navman Satalite GPS Data if U wish to know what I did please contact me on [email protected]
My ICN 320 now takes a few seconds to conect to Satalite systems/
Regards
Ken

Jun 02, 2008 • Navman iCN 320 GPS Receiver

Question 2

Anonymous

Contributor 1 Answer
Posted on Oct 03, 2010

Anonymous

Contributor

Joined: Oct 03, 2010

Answers

1

Questions

0

Helped

1548

Points

2

Hi
them works together nice !
connect SA320 green wire to RAY white and SA320 shield(black cover) to RAY green.SA320 red to 12 and black to ground(-).

Answer 2

Anonymous

Contributor 1 Answer
Posted on Jun 21, 2013

Anonymous

Contributor

Joined: Jun 21, 2013

Answers

1

Questions

0

Helped

1548

Points

0

Hi Guys.

Just for more info, fitted a SA-320 GPS to my S3 Raymarine setup with an E80 display. The SA-320 comes with 5 wires : White, Red, Black, Black(SHEILD) and Green.

To connect this GPS to the NMEA on the S3, Red and black go to any 12v pos/neg, you can jump it off any of the power points, then connect Green the NMEA +in and Black (SHEILD) to the NMEA -in. The white is not required so just leave it secured.

Works like a dream, however obviously the GPS setup on your Raymarine suite will not control / show any info.

Related Topics:

I just bought a raymarine c 70 with an evermore sa 320 gps, can anyone help with the wiring i have to do as i seem to have misplaced the instructions which came with the sa 320.

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Raymarine 4000 + autopilot. I immediately get an RG Fail message when I engage the autopilot on my Catalina 320 Sailboat.

What is the connection path from Garmin 72 to raymarine c80, using NMEA 1083

Just interested on ''how'' the Autohelm ST1000 Plus works! is there somewhere on the net that I can check, I just bought a boat with one one it and I know how to make it work, but I want to...

I bought a RayNav 300 GPS on ebay and it came without a power cord. Can you help me locate one?

Connect Ratheon RL 70 to Raymarine E80

I Have a Raymarine Radar RL70CRC HSB2 the

Need to connect NMEA0183 to radio

Which wires to connect when connecting a marine antenna to a raycraft gps

RAYMARINE C80 SEATALK CABLE INSTALLATION

Can't get updates for ICN 320

Not finding what you are looking for?

GPS

Raymarine 4000 + autopilot. I immediately get an RG Fail message when I engage the autopilot on my Catalina 320 Sailboat.

Ask a Question

Top Raymarine GPS Experts

ZJ Limited

Alexander

ADMIN Andrew

Are you a Raymarine GPS Expert? Answer questions, earn points and help others

Manuals & User Guides

PCSeaTalkNMEA.pdf....

Http://www.raymarine.com/raymarine/Sub...

Http://www.raymarine.com/Raymarine/Sub...

Related Topics:

I just bought a raymarine c 70 with an evermore sa 320 gps, can anyone help with the wiring i have to do as i seem to have misplaced the instructions which came with the sa 320.

2 Answers

Anonymous

Anonymous

Add Your Answer

Attachments: Added items

Related Questions:

Raymarine 4000 + autopilot. I immediately get an RG Fail message when I engage the autopilot on my Catalina 320 Sailboat.

What is the connection path from Garmin 72 to raymarine c80, using NMEA 1083

Just interested on ''how'' the Autohelm ST1000 Plus works! is there somewhere on the net that I can check, I just bought a boat with one one it and I know how to make it work, but I want to...

I bought a RayNav 300 GPS on ebay and it came without a power cord. Can you help me locate one?

Connect Ratheon RL 70 to Raymarine E80

I Have a Raymarine Radar RL70CRC HSB2 the

Need to connect NMEA0183 to radio

Which wires to connect when connecting a marine antenna to a raycraft gps

RAYMARINE C80 SEATALK CABLE INSTALLATION

Can't get updates for ICN 320

Not finding what you are looking for?

GPS

Raymarine 4000 + autopilot. I immediately get an RG Fail message when I engage the autopilot on my Catalina 320 Sailboat.

Ask a Question

Popular Questions

Raymarine e-80 chart plotter keeps rebooting

St60 wind instrument

Wiring of seatalk instruments

Can I enter waypoints by Lat & Long numbers on my

Raytheon rl70

Top Raymarine GPS Experts

ZJ Limited

Alexander

ADMIN Andrew

Are you a Raymarine GPS Expert? Answer questions, earn points and help others

Manuals & User Guides

PCSeaTalkNMEA.pdf....

Http://www.raymarine.com/raymarine/Sub...

Http://www.raymarine.com/Raymarine/Sub...