What is the model # for a remote for the Kenwood kdcmp342u and where to buy one.

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjXgKW8mOr6AhWFpokEHR7dCO8QFnoECA8QAQ&url=https%3A%2F%2Fwww.vintageshifi.com%2Frepertoire-pdf%2Fpdf%2Ftelecharge.php%3Fpdf%3DKenwood-DPM-993-Owners-Manual.pdf&usg=AOvVaw3Egktp5e2PKVgF8ppDrztX

RC-R0620 is the remote control model number (RC-R0622 in U.K./EU) you can buy on eBay or amazon A universal remote may work but only if the universal has codes for your Kenwood. Check first.

http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcmp342u.pdf

https://www.google.com/search?q=kenwood+kdc+mp342u+wiring+diagram&hl=en&sa=X&prmd=imvns&tbm=isch&tbo=u&source=univ&ei=jKJ6UI_dDYiXyAG9j4Aw&ved=0CCYQsAQ&biw=839&bih=523

http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcmp342u.pdf

I didn't see anything about a loud button, but I found a link to the users manual, and I believe what you are looking for is on PAGE 11.

http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcmp342u.pdf

I have only the genaral rule, I dont know the particulars.
Kenwood used to have preset passwords as 1234
pressing the stop button ( if you have one ) for 30 seconds.
As i said these are general rules for reseting but I'm not familiar with your model
( buy Yamaha )

To set the clock go to the link below and on page 7 will tell you how to set.

http://www.kenwoodusa.com/UserFiles/File/UnitedStates/Consumer/Manuals/kdcmp342u.pdf

Good Luck

You can clear the code it you have the remote for it. No remote means no way to use the radio. If you know of a friend who has a Kenwood car stereo and the remote, you should be able to clear it yourself. It does not need to be the remote from that model of Kenwood. Most of the Kenwood remotes are the same for all the different models. I use the same remote for all models of Kenwoods that I get at my service center. You could always buy a remote, but if the problem is more than just clearing the code you would be wasting more money. I work at an authorized Kenwood service center and have over 18 years of experience with them. I have seen on rare occasions when the radio needs the code cleared, it has a problem with the microproccessor or the IC that is used for the security code. As I said, it is rare, but it can happen and may be safer to not spend anymore money on a new remote.

If you decide you want to buy a remote or you can borrow one from somebody, let me know and I will send you a link to a place you can buy one if needed, and then I will also post the procedure you need to use for clearing the code.

If the Kenwood dealer you took the radio to is a retail outlet and not a authorized Kenwood repair center, it is likely that they do not know the proper procedure for clearing the code. Kenwood does not tell their retail outlets how to do this procedure.

If you need me to post the procedure, please wait on rating me until I post for you.

Let me know how you want to do this.

Dave

i WILL BUY YOUR Kenwood RC-R0608 Remote
[email protected]

Make a search in google by the remote control model, i make one several month ago and found some vendors that cary that particular remote for around $25.
I also found the remote in ebay.
let me know If you can not find the original remote i have the model of another remote that works with the receiver acording to kenwood, but is more expensive.
Joe