At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A foot pedal for a Husqvarna Viking 1610 sewing machine can be obtained from several sources:
Sewing machine dealers: Many sewing machine dealers, especially those that specialize in Husqvarna Viking sewing machines, carry a wide range of replacement parts, including foot pedals.
Online retailers: Websites such as Amazon, Ebay, and SewingMachinesPlus carry a wide range of replacement parts for older and newer sewing machines, including foot pedals for the Husqvarna Viking 1610.
Husqvarna Viking: You can contact the manufacturer Husqvarna Viking to find the nearest authorized dealer or to purchase parts directly from the company.
Specialty stores: Some specialty stores that focus on sewing machine parts carry a wide range of replacement parts, including foot pedals for older and newer models of sewing machines.
The part is no longer available from Viking. However, you might be able to buy a used one on ebay or from sewing machine parts. However, you might try contacting some of the Viking stores to determine if they have a used one from a machine they use for parts. You can send me a private email and I'll give you some Viking dealers you can contact. email: [email protected]
It could be lint jammed into the jack the cord plugs into. Make sure the jack and plug are both clean and free of lint. It also could be a damaged cord. If a friend has a working Viking pedal try borrowing theirs to see if it works on your machine. If not, your machine might need service.
does the foot pedal plug into the machine by itself? if so unplug the foot pedal & then turn on the machine, if it doesn't run by it's self then you know it's the foot pedal.
but if it still has the problem check the foot pedal for a circuit board
The feed dogs are not working in conjunction with needle because of the bulk. The bulkiness especially at the seams causes a shift under the pressure foot and the bobbin spins off excessive thread. When you get to the seam, you need to raise the presser foot so it goes over the seam evenly. Get a jeanajig or use something that will level off the presser foot as it goes over and as it comes off the seam. Also trim some of the bulk off before you fold the hem over to sew it.
Mine does the exact same thing. I think the problem might lie in the cord to the foot pedal. The cord packs into the foot pedal for storage, which forces the cord to to remain bent during storage. I believe the wires in mind became damaged and broken so I took it apart and reconnected the wires at the spot where the connector meets with the wires. But I still don't leave it plugged in if I'm not using it, it could be a fire hazard.
×